论文

PREPARATION OF LUMINESCENT MATERIALS BaMoO4:Eu3+ BY HIGH TEMPERATURE BALL MILLING

  • CHEN Xue-Bing ,
  • TIAN Pan-Wen ,
  • SHAO Zhong-Bao
Expand
  • 1) College of Material and Metallurgy, Northeastern University, Shenyang 110819
    2) College of Sciences, Northeastern University, Shenyang, 110819

Received date: 2010-04-15

  Revised date: 2010-04-27

  Online published: 2010-07-11

Supported by

Supported by National Natural Science Foundation of China (No.10874022)

Abstract

BaMoO4:Eu3+ phosphors were synthesized by high temperature ball milling method and using (NH4)6Mo7O24?4H2O, BaCO3 and Eu2O3 as raw materials. Crystalline phases, morphology and luminescent properties of sample were characterized by XRD, SEM and emission spectra. XRD patterns indicated that a single phase of BaMoO4:Eu3+ can be obtained by 4 h ball milling at\linebreak 600℃, with 15% Eu3+ (mole fraction) dopped concentration. Photolumincence experiment results showed that the emission is a line spectrum and the main peak is located at visible red light\linebreak (616 nm). The synthesized temperature was decreased about 400℃ while the dopped Eu3+ concentration was increased about 7\% than those of chemical deposited method. The BaMoO4:Eu3+ powders has considerable luminescent intensity prepared under the optimum technological conditions. In the high temperature ball milling process, the cooperation action of milling and temperature, significantly increased the activation energy of the reaction system.

Cite this article

CHEN Xue-Bing , TIAN Pan-Wen , SHAO Zhong-Bao . PREPARATION OF LUMINESCENT MATERIALS BaMoO4:Eu3+ BY HIGH TEMPERATURE BALL MILLING[J]. Acta Metall Sin, 2010 , 46(7) : 862 -866 . DOI: 10.3724/SP.J.1037.2010.00183

References

[1]Su Q, Wu H, Pan Y X, Xu J, Guo C F, ZhangXM, Zhang J H, Wang J, Zhang M. J Chin Rare Earth Soc, 2005; 23: 513
[2](苏锵, 吴昊, 潘跃晓, 徐剑, 郭崇峰, 张新民, 张剑辉, 王 静, 张梅. 中国稀土学报, 2005; 23: 513)
[3]Li S X, Li D J, Wang Y P, Wang Z. Mater Rev, 2008; 22(4): 18
[4](李绍霞, 李大吉, 王亚平, 王 卓. 材料导报, 2008; 22(4): 18)
[5]Taguchi T. Proc SPIE 2004, 5530,7
[6]Cao F B, Tian Y W, Chen Y J, Xiao L J. Mater Rev, 2008; 22(6): 104
[7](曹发斌, 田彦文, 陈永杰, 肖林久. 材料导报, 2008; 22(6): 104)
[8]Zhou L Y, Wei J S, Gong F Z, Huang J L, Yi L H. J Solid State Chem 2008, 181,1337
[9]Wang Z L, Liang H B, Zhou L Y, Wu H, Gong M L, Su Q. Chem Phys Lett 2005, 412,313
[10]Guo C F, Chen T, Zhang W, Huang D X. J Phys Chem Solid 2008, 69,1905
[11]Wang Q M, Yan B. Mater Chem Phys 2005, 94,241
[12]Zhou Y, Lin J, Yu M, Wang S. J Alloys Compd 2004, 375,93
[13]Thongtem T, Phuruangrat A, Thongtem S. Mater Lett 2008, 62,454
[14]Chen L P, Xiao D Q, Bi J, Yu P, Yang Z N, Yu G L, Zhu J G. J Funct Mater, 2005; 36 (1): 127
[15](陈连平, 肖定全, 毕剑, 余萍, 杨祖念, 于光龙, 朱建国. 功能材料, 2005; 36 (1): 127)
[16]Li C, Huo Y J, He S F, Cao Y H. Acta Opt Sin, 1999; 19: 243
[17](李 成, 霍玉晶, 何淑芳, 曹余惠. 光学学报, 1999; 19: 243)
[18]Chen D, Yan H G, Huang P Y. Chin J Rare Met, 2003; 27: 293
[19](陈鼎, 严红革, 黄培云. 稀有金属, 2003; 27: 293)
[20]Zhang S Y, Wei K. Spectrosc Spectral Anal, 2004; 24: 407
[21](张世英, 魏坤. 光谱学与光谱分析, 2004; 24: 407)

Outlines

/