Please wait a minute...
Acta Metall Sin  2013, Vol. 49 Issue (3): 372-378    DOI: 10.3724/SP.J.1037.2012.00564
Current Issue | Archive | Adv Search |
INVESTIGATIONS ON DISSOLUTION MECHANISM OF LAVES PHASE IN GH4169 ALLOY INGOT BASED ON CLASSICAL DYNAMICAL MODEL
ZHANG Maicang, CAO Guoxin, DONG Jianxin, ZHENG Lei, YAO Zhihao
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083
Cite this article: 

ZHANG Maicang, CAO Guoxin, DONG Jianxin, ZHENG Lei, YAO Zhihao. INVESTIGATIONS ON DISSOLUTION MECHANISM OF LAVES PHASE IN GH4169 ALLOY INGOT BASED ON CLASSICAL DYNAMICAL MODEL. Acta Metall Sin, 2013, 49(3): 372-378.

Download:  PDF(822KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

It is an urgent thing how to control the quality of large size GH4169 ingots nowadays. The high Nb element content in this alloy can increase the tendency of freckle defect formation. Though almost all the investigators consider that the segregation of Nb-riched Laves phase is the key factor of the freckle defect, how to avoid this phenomenon is still a hard-to-solve problem in engineering practice. In this work, a new prototype system based on classical dynamical model related to basic metallurgy theory was established to simulate the dynamical dissolving process of precipites evolution in nickel base superalloys. In this prototype system, the parameters related to the thermodynamic equilibrium state can be got from thermodynamic software of Thermo-Calc, the solute element diffusion coefficient at any temperature and time iterative can be got from dynamic software of Dictra. By using this prototype system, the dissolution process of Laves phase during homogenization process with different initial particle sizes for GH4169 alloy was simulated, and then series remelting experiments with different cooling rates and different Laves phase distributions were carried out, and the calculated results were in good agreement with the experimental results. This newly developed prototype system may give great help to homogenization process design in engineering use.

Received:  24 September 2012     

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2012.00564     OR     https://www.ams.org.cn/EN/Y2013/V49/I3/372

[1] Long Z, Liu X B, Yang W.Mater Sci Eng, 2004; A386: 254


[2] Min Z X, Shen J, Feng Z R, Wang L S, Liu L, Fu H Z.Acta Metall Sin, 2010; 46: 1543

(闵志先, 沈军, 冯周荣, 王灵水, 刘林, 傅恒志. 金属学报, 2010; 46: 1543)

[3] Sun X F, Yin F S, Li J G, Hou G C, Zheng Q, Guan H R, Hu Z Q.Acta Metall Sin, 2003; 39: 27

(孙晓峰, 殷凤仕, 李金国, 侯贵臣, 郑启, 管恒荣, 胡壮麒. 金属学报, 2003; 39: 27)

[4] Wang C Y, Beckermann C.Mater Sci Eng, 1993; A171: 199

[5] Rao G A, Kumar M, Srinivas M, Sarma D S.Mater Sci Eng, 2003; A355: 114

[6] Wang L, Dong J X, Tian Y L, Xie X S.Rare Met Mater Eng, 2006; 35: 1408

(王玲, 董建新, 田玉亮, 谢锡善. 稀有金属材料与工程, 2006; 35: 1408)

[7] Tian Y L, Wang L, Dong J X, Zhang M C.Rare Met Mater Eng, 2006; 35: 1315

(田玉亮, 王玲, 董建新, 张麦仓. 稀有金属材料与工程, 2006; 35: 1315)

[8] Alexandre P B, Ivaldo L F, Amauri G.Mater Sci Eng, 2006; A435--436: 150

[9] Miao Z J, Shan A D, Wu Y B, Lu J, Song H W.Trans Nonferrous Met Soc China, 2011; 21: 1009

[10] Song W X.Metallography. Beijing: Metallurgical Industry Press, 2007: 82

(宋维锡. 金属学. 北京: 冶金工业出版社, 2007: 82)

[11] Liang X, Zhang R, Yang Y. In: Loria E A ed.,Superalloys 718, 625, 706, Warrendale: TMS, 1994: 947

[12] Wang L.PhD Dessertation, University of Science and Technology Beijing, 2006

(王玲. 北京科技大学博士学位论文, 2006)

[13] Vermolen F J, Zwaag V D.Mater Sci Eng, 1996; A220: 140

[14] Vermolen F J, Vuik C, Zwaag S V.Mater Sci Eng, 2002; A328: 14

[15] Javierre E, Vuik C, Vermolen F J, Segal A.J Comput Phys, 2007; 224: 222

[16] Vermolen F J, Vuik K, Zwaag S V.Mater Sci Eng, 1998; A254: 13

[17] Vermolen F J, Vuik C.J Comput Phys, 2000; 126: 233

[18] Vermolen F J, Vuik C, Zwaag S V.Mater Sci Eng, 2003; A347: 265

[19] Xu H J.Fundamentals of Materials Science and Engineering. Beijing: Beijing University of Technology

Press, 2001: 305

(徐恒钧. 材料科学基础. 北京: 北京工业大学出版社, 2001: 305)

[20] Chen S P, Vossenberq M S, Vermolen F J.Mater Sci Eng, 1999; A272: 250

[21] Aaron H B.Met Sci J, 1969; 2: 192

[22] Aaron H B.Acta Metall Mater, 1969; 17: 407

[23] Paul D J, Christopher J C.Metall Mater Trans, 2009; 40B: 182

[24] Huang Q Y, Li H K.Superalloy. Beijing: Metallurgical Industry Press, 2000: 46

(黄乾尧, 李汉康. 高温合金. 北京: 冶金工业出版社, 2000: 46)

[25] Miao Z J.PhD Dessertation, Shanghai Jiao Tong University, 2011

(缪竹骏. 上海交通大学博士学位论文, 2011)

 
No related articles found!
No Suggested Reading articles found!