|
|
|
| THE EFFECT OF Cr AND Si ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF AN IRON-BASE ALLOY |
| Res. Gp. of Iron-Base Superalloy(Institute of Metal Research; Academia Sinica) |
|
Cite this article:
Res. Gp. of Iron-Base Superalloy(Institute of Metal Research; Academia Sinica). THE EFFECT OF Cr AND Si ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF AN IRON-BASE ALLOY. Acta Metall Sin, 1978, 14(4): 348-461.
|
|
|
Abstract In a 35Ni-15Cr type iron-base superalloy, it has been found that, with the falling of Cr content from 15 to 12％, the oxidation resisting, as well as stressrupture and tensile properties were little effected, the latter however, appeared to vary significantly with the influence of Si contents. The σ and Laves phases were suppressed, and the microstructural stability increased with decreasing Cr and Si contents.The extracting process of G-phase by electrolytic and chemical method has been studied. By means of chemical in combination with electron probe analysis, the composition of G-phase was ascertained to be about Ni_(18)Ti_(10)Si_(16).
|
|
Received: 18 April 1978
|
[1] 铁基高温合金研究组,金属学报,14(1978) ,227．
[2] Speich, G. R. and Clark, J. B., Precipitation From Iron-base Alloys, Gordon and Breach, New York, 1965, p. 92．{ |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
