SPATIAL ORIENTATION DISTRIBUTION OF CRYSTALLITES IN COLD-ROLLED AND IN ANNEALED SHEETS OF DEEP-DRAWING PHOSPHORUS STEEL

Acta Metall Sin

1980, Vol. 16

Issue (2): 121-139 DOI:

Current Issue | Archive | Adv Search

SPATIAL ORIENTATION DISTRIBUTION OF CRYSTALLITES IN COLD-ROLLED AND IN ANNEALED SHEETS OF DEEP-DRAWING PHOSPHORUS STEEL

Hsun Hu U. S. Steel Research Laboratory

Cite this article:

Hsun Hu U. S. Steel Research Laboratory. SPATIAL ORIENTATION DISTRIBUTION OF CRYSTALLITES IN COLD-ROLLED AND IN ANNEALED SHEETS OF DEEP-DRAWING PHOSPHORUS STEEL. Acta Metall Sin, 1980, 16(2): 121-139.

Download:

PDF(1551KB)
Export: BibTeX | EndNote (RIS)

Abstract The cold-rolling and annealing textures of a deep-drawing phosphorus steelhave been studied by he patial orientation distribution of the crystallites. Thecharacteristics of the orientation distribution unctions of the as-cold-rolled andof the annealed sheets were closely examined. The observed features uggest thatthe annealing texture is originated by microband or transition-band nucleation,followed by the rowth of recrystallized grains at the expense of the matrix de-formation textures. The crystallite rientation distribution of the annealed sheetof the deep-drawing phosphorus steel is clearly different from hat of the annealedsheet of deep-drawing aluminum-killed steels.

Received: 18 February 1980

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1980/V16/I2/121

[1] Hu, H., Texture Cryst. Sol., 2 (1976) , 113．
[2] Hu, H., Met. Trans., 8A (1977) , 1567．
[3] Hu, H., Texture Cryst. Sol., 3 (1979) , 215--230．
[4] Hu, H., "Effect of Silicon on Annealing Texture, Plastic Anisotropy, and Mechanical Properties of Low-Carbon Phosphorus-Containing Steels," Proceedings of Symposium on Modern Developments in HSLA Formable Steels, TMS-AIME Fall Meeting, October 24--27, 1977, Chicago, Ⅰ.Ⅱ.
[5] Hu, H., "Low-Carbon Phosphorus Steels for High-Strength Cold-Rolled Sheet Applications," Unpublished work, U. S. Steel Research Laboratory.
[6] Roe, R. J., J. Appl. Phys., 36 (1965) , 2024．
[7] Roe, R. J., J. Appl. Phys., 37 (1966) , 2069．
[8] Bunge, H. J., Z. Metallk., 56 (1965) , 872．
[9] Bunge, H. J., Mathematische Methoden der Texturanalyse, Akademie-Verlag, Berlin, 1969．
[10] Morris, P. R. and Heckler, A. J., Advances in X-Ray Analysis, 1968, Vol. 11, p. 454．
[11] Meieran, E. S., Rev. Sci. Instrum., 33 (1962) , 319．
[12] Lopata, S. L. and Kula, E. B., Trans. AIME, 224 (1962) , 865．
[13] Leber, S., Rev. Sci. Instrum., 36 (1965) , 1747．
[14] Elias, J. A. and Heckler, A. J., Trans. AIME, 239 (1967) , 1237．
[15] Schuiz, L. G., J. Appl. Phys., 20 (1949) , 1030．
[16] Morris, P. R., Texture Cryst. Sol., 2 (1976) , 57．
[17] Jura, J. and Pospiech, J., Texture Cryst. Sol., 2 (1976) , 81．
[18] Bunge, H. J., Tobisch, J. and Mucklich, A., Texture, 1 (1974) , 211．
[19] Humbert, M., Wagner, F. and Baro, R., Texture Cryst. Sol., 3 (1978) , 27．
[20] Davies, G. J., Goodwill, D. J. and Kallend, J. S., J. Appl. Cryst., 4 (1971) , 67．
[21] Hu, H., in Recovery and Recrystallization of Metals, Interscience Publishers, New York, 1963, p. 311． [22] Bunge, H. J., Phys. Status Solidi, 26 (1968) , 167．
[23] Bunge, H. J. and Roberts, W. T., J. Appl., Cryst., 2 (1969) , 116．
[24] Schlafer, D. and Bunge, H. J., Texture, 1 (1974) , 157．
[25] Bunge, H. J., Schleusener, D. and Schlafer, D., Met. Sci. J., 8 (1974) , 413．
[26] Hechler, A. J. and Granzow, W. G., Met. Trans., 1 (1970) , 2089．
[27] Inagaki, H. and Suda, T., Texture, 1 (1973) , 129．
[28] Willis, D. J. and Hatherly, M., in Texture and Properties of Materials, 4th Int. Conf. on Texture, Cambridge, The Metals Society, 1976, p. 48．

No related articles found!

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed