|
|
EFFECT OF HYDROGEN ON CREEP IN AUSTENITIC STAINLESS STEEL |
CHU Wuyang; DING Wei; XIAO Jimei (Beijing University of Iron and Steel Technology) |
|
Cite this article:
CHU Wuyang; DING Wei; XIAO Jimei (Beijing University of Iron and Steel Technology). EFFECT OF HYDROGEN ON CREEP IN AUSTENITIC STAINLESS STEEL. Acta Metall Sin, 1986, 22(2): 27-30.
|
Abstract The dynamic charging does not influence on the creep rate of type 321 austenitic stainless steel if the initial strain was less than 2%, in which the amounts evolving hydrogen after test were below 1.5 ppm (by wt). However, the creep rate increased markedly when the initial strain was larger then 8% or the specimen was precharged for a long time. In the case the corresponding amount evolving hydrogen was 5 to 12 ppm (by wt).
|
Received: 18 February 1986
|
1 Shin, K.S.; Park, C.G.; Nagakawa, J.; Meshii, M., Scr. Metall., 14 (1980) , 279. 2 Oriani, R.A.; Josephic, P.H., Acta Metall., 27 (1979) , 997; 29 (1981) , 669. 3 Chu,W.Y.(褚武扬);Yao,J.(姚京);Hsiao,C.M.(肖纪美),Metall.Trans.,15A (1984) ,729. 4 姚京;褚武扬;肖纪美,金属学报,20 (1984) ,A124 5 Chu,W.Y.(褚武扬);Wang,H.L.(王核力);Hsiao,C.M.(肖纪美),Corrosion,40 (1984) ,487. 6 乔利杰;褚武扬;肖纪美,奥氏体不锈钢Ⅲ型试样的应力腐蚀与氢致开裂,1984,待发表 7 王燕斌;褚武扬;肖纪美,金属学报,18 (1982) ,673. 8 褚武扬;肖纪美;李世琼,金属学报,17 (1981) ,10.R |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|