异构金属材料的设计与制造
收稿日期: 2022-08-04
修回日期: 2022-09-06
网络出版日期: 2022-09-20
基金资助
国家自然科学基金项目(51725503)
Design and Manufacture of Heterostructured Metallic Materials
Received date: 2022-08-04
Revised date: 2022-09-06
Online published: 2022-09-20
Supported by
National Natural Science Foundation of China(51725503)
通过构筑金属异构材料以实现强韧均衡的材料设计和制造方法,已成为机械工程和材料科学等领域的前沿方向与研究热点。近年来,对异构金属材料内部多种强韧化机制的理解已逐渐深入,而建立强韧化增益效果与微观结构特征参量的定量关联,进而指导强韧化工艺研发,对异构金属材料的设计理论、制造成形及性能表征具有重要意义。本文主要综述了近年来异构金属材料的微观结构调控理论基础与常用制造工艺的进展。首先按照微观调控手段对异构金属材料进行分类,随后综述了异构金属材料微观结构调控的若干理论基础,最后以“自上而下”和“自下而上”对强韧化工艺进行分类,介绍了常见的异构金属材料制备工艺方法。在此基础上,对异构金属材料设计与制造面临的挑战和发展方向进行了讨论与展望。
张显程 , 张勇 , 李晓 , 王梓萌 , 贺琛贇 , 陆体文 , 王晓坤 , 贾云飞 , 涂善东 . 异构金属材料的设计与制造[J]. 金属学报, 2022 , 58(11) : 1399 -1415 . DOI: 10.11900/0412.1961.2022.00370
The design and manufacture of heterostructured metallic materials for the balanced improvement of strength and ductility by interior microstructure construction have been the research frontiers and focus in mechanical engineering and materials science. Recently, the understanding of multiple hardening mechanisms in heterostructured metallic materials has progressively advanced. Although establishing quantitative relationships between hardening effects and microstructural parameters and further instructing the research and development of manufacturing for a superior combination between strength and ductility will be of significant value to the design theory, the manufacturing processes and property characterization of heterostructured metallic materials are crucial. In this article, the research progress on the theoretical foundations of designing microstructures and manufacturing processes for heterostructured metallic materials was reviewed. First, the heterostructured metallic materials from the perspective of their microstructural regulation method were categorized. Second, the theoretical foundations for the microstructural regulation of heterostructured materials were reviewed. Third, the manufacturing process for heterostructured materials was classified in terms of the up-bottom and bottom-up approaches as well as reviewed. Finally, the challenges and future development of the design and manufacture of heterostructured metallic materials were addressed.
| 1 | Lu K. The future of metals [J]. Science, 2010, 328: 319 |
| 2 | Gunderov D V, Polyakov A V, Semenova I P, et al. Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing [J]. Mater. Sci. Eng., 2013, A562: 128 |
| 3 | Zou H H, Zeng X Q, Zhai C Q, et al. Development in strengthening and toughening of magnesium alloys [J]. Mater. Mech. Eng., 2004, 28(5): 1 |
| 3 | 邹宏辉, 曾小勤, 翟春泉 等. 镁合金的强韧化进展 [J]. 机械工程材料, 2004, 28(5): 1 |
| 4 | Liu P, Kang B X, Cao X G, et al. Coherent strengthening of aging precipitation in rapidly solidified Cu-Cr alloy [J]. Acta Metall. Sin., 1999, 35: 561 |
| 4 | 刘 平, 康布熙, 曹兴国 等. 快速凝固Cu-Cr合金时效析出的共格强化效应 [J]. 金属学报, 1999, 35: 561 |
| 5 | Yan S, Liu X H, Liu W J, et al. Microstructure, mechanical properties and strengthening mechanisms of a Cu bearing low-carbon steel treated by Q&P process [J]. Acta Metall. Sin., 2013, 49: 917 |
| 5 | 闫 述, 刘相华, 刘伟杰 等. 含Cu低碳钢Q&P工艺处理的组织性能与强化机理 [J]. 金属学报, 2013, 49: 917 |
| 6 | Studart A R. Towards high-performance bioinspired composites [J]. Adv. Mater., 2012, 24: 5024 |
| 7 | Ritchie R O. The conflicts between strength and toughness [J]. Nat. Mater., 2011, 10: 817 |
| 8 | Liu X C, Zhang H W, Lu K. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel [J]. Science, 2013, 342: 337 |
| 9 | Fan G H, Geng L, Wu H, et al. Improving the tensile ductility of metal matrix composites by laminated structure: A coupled X-ray tomography and digital image correlation study [J]. Scr. Mater., 2017, 135: 63 |
| 10 | Sun L G, He X Q, Lu J. Nanotwinned and hierarchical nanotwinned metals: A review of experimental, computational and theoretical efforts [J]. npj Comput. Mater., 2018, 4: 6 |
| 11 | Wu X L, Yang M X, Yuan F P, et al. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility [J]. Proc. Natl. Acad. Sci. USA, 2015, 112: 14501 |
| 12 | Zhu Y T, Ameyama K, Anderson P M, et al. Heterostructured materials: Superior properties from hetero-zone interaction [J]. Mater. Res. Lett., 2021, 9: 1 |
| 13 | Wang Y M, Chen M W, Zhou F H, et al. High tensile ductility in a nanostructured metal [J]. Nature, 2002, 419: 912 |
| 14 | Li X Y, Lu L, Li J G, et al. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys [J]. Nat. Rev. Mater., 2020, 5: 706 |
| 15 | Misra A, Göken M, Mara N A, et al. Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates [J]. MRS Bull., 2021, 46: 236 |
| 16 | Sathiyamoorthi P, Kim H S. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties [J]. Prog. Mater. Sci., 2022, 123: 100709 |
| 17 | Wu H, Fan G H. An overview of tailoring strain delocalization for strength-ductility synergy [J]. Prog. Mater. Sci., 2020, 113: 100675 |
| 18 | Li J G, Zhang Q, Huang R R, et al. Towards understanding the structure-property relationships of heterogeneous-structured materials [J]. Scr. Mater., 2020, 186: 304 |
| 19 | Lu K. Making strong nanomaterials ductile with gradients [J]. Science, 2014, 345: 1455 |
| 20 | Li G D, Morinaka S, Kawabata M, et al. Improvement of strength with maintaining ductility of harmonic structure pure copper by cold rolling and annealing process [J]. Procedia Manuf., 2018, 15: 1641 |
| 21 | Wu X L, Zhu Y T. Heterogeneous materials: A new class of materials with unprecedented mechanical properties [J]. Mater. Res. Lett., 2017, 5: 527 |
| 22 | Pan Q S, Zhang L X, Feng R, et al. Gradient cell-structured high-entropy alloy with exceptional strength and ductility [J]. Science, 2021, 374: 984 |
| 23 | Duan F H, Lin Y, Pan J, et al. Ultrastrong nanotwinned pure nickel with extremely fine twin thickness [J]. Sci. Adv., 2021, 7: eabg5113 |
| 24 | Shukla S, Choudhuri D, Wang T H, et al. Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy [J]. Mater. Res. Lett., 2018, 6: 676 |
| 25 | Yang M X, Yuan F P, Xie Q G, et al. Strain hardening in Fe-16Mn-10Al-0.86C-5Ni high specific strength steel [J]. Acta Mater., 2016, 109: 213 |
| 26 | Huang C X, Wang Y F, Ma X L, et al. Interface affected zone for optimal strength and ductility in heterogeneous laminate [J]. Mater. Today, 2018, 21: 713 |
| 27 | Lu L, Shen Y F, Chen X H, et al. Ultrahigh strength and high electrical conductivity in copper [J]. Science, 2004, 304: 422 |
| 28 | Wei Y J, Li Y Q, Zhu L C, et al. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins [J]. Nat. Commun., 2014, 5: 3580 |
| 29 | Liu X C, Zhang H W, Lu K. Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment [J]. Acta Mater., 2015, 96: 24 |
| 30 | Zhang X Z, Wang Y M, Chen T J, et al. Achieving a heterogeneous lamella-structured aluminum alloy with excellent synergy of strength and ductility by powder thixoforming [J]. Mater. Sci. Eng., 2022, A838: 142781 |
| 31 | Zhang X H, Lilleodden E, Wang J. Recent trends on studies of nanostructured metals [J]. MRS Bull., 2021, 46: 217 |
| 32 | Ovid'ko I A, Valiev R Z, Zhu Y T. Review on superior strength and enhanced ductility of metallic nanomaterials [J]. Prog. Mater. Sci., 2018, 94: 462 |
| 33 | Yang M X, Pan Y, Yuan F P, et al. Back stress strengthening and strain hardening in gradient structure [J]. Mater. Res. Lett., 2016, 4: 145 |
| 34 | Feaugas X. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: Back stress and effective stress [J]. Acta Mater., 1999, 47: 3617 |
| 35 | Zhu Y T, Wu X L. Perspective on hetero-deformation induced (HDI) hardening and back stress [J]. Mater. Res. Lett., 2019, 7: 393 |
| 36 | Yang M X, Yan D S, Yuan F P, et al. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength [J]. Proc. Natl. Acad. Sci. USA, 2018, 115: 7224 |
| 37 | Wang Y F, Huang C X, Fang X T, et al. Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient [J]. Scr. Mater., 2020, 174: 19 |
| 38 | Zhang Y, Chen H, Jia Y F, et al. A modified kinematic hardening model considering hetero-deformation induced hardening for bimodal structure based on crystal plasticity [J]. Int. J. Mech. Sci., 2021, 191: 106068 |
| 39 | Zhao J F, Lu X C, Yuan F P, et al. Multiple mechanism based constitutive modeling of gradient nanograined material [J]. Int. J. Plast., 2020, 125: 314 |
| 40 | Li J J, Lu W J, Chen S H, et al. Revealing extra strengthening and strain hardening in heterogeneous two-phase nanostructures [J]. Int. J. Plast., 2020, 126: 102626 |
| 41 | Lu X C, Zhang X, Shi M X, et al. Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper [J]. Int. J. Plast., 2019, 113: 52 |
| 42 | Li J J, Weng G J, Chen S H, et al. On strain hardening mechanism in gradient nanostructures [J]. Int. J. Plast., 2017, 88: 89 |
| 43 | Hill R. The Mathematical Theory of Plasticity [M]. New York: Oxford University Press, 1998: 1 |
| 44 | Lin Y, Pan J, Zhou H F, et al. Mechanical properties and optimal grain size distribution profile of gradient grained nickel [J]. Acta Mater., 2018, 153: 279 |
| 45 | He C Y, Yang X F, Chen H, et al. Size-dependent deformation mechanisms in copper gradient nano-grained structure: A molecular dynamics simulation [J]. Mater. Today Commun., 2022, 31: 103198 |
| 46 | Cao P H. The strongest size in gradient nanograined metals [J]. Nano Lett., 2020, 20: 1440 |
| 47 | Ma X L, Huang C X, Moering J, et al. Mechanical properties of copper/bronze laminates: Role of interfaces [J]. Acta Mater., 2016, 116: 43 |
| 48 | Zhao J F, Kan Q H, Zhou L C, et al. Deformation mechanisms based constitutive modelling and strength-ductility mapping of gradient nano-grained materials [J]. Mater. Sci. Eng., 2019, A742: 400 |
| 49 | Zhao J F, Zaiser M, Lu X C, et al. Size-dependent plasticity of hetero-structured laminates: A constitutive model considering deformation heterogeneities [J]. Int. J. Plast., 2021, 145: 103063 |
| 50 | Shin S, Zhu C Y, Zhang C, et al. Extraordinary strength-ductility synergy in a heterogeneous-structured β-Ti alloy through microstructural optimization [J]. Mater. Res. Lett., 2019, 7: 467 |
| 51 | Huang J X, Liu Y, Xu T, et al. Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel [J]. Mater. Sci. Eng., 2022, A834: 142584 |
| 52 | Liu X L, Xue Q Q, Wang W, et al. Back-stress-induced strengthening and strain hardening in dual-phase steel [J]. Materialia, 2019, 7: 100376 |
| 53 | Demeri M Y. Advanced High-Strength Steels: Science, Technology, and Applications [M]. Materials Park: ASM International, 2013: 1 |
| 54 | Wu H, Fan G H, Huang M, et al. Deformation behavior of brittle/ductile multilayered composites under interface constraint effect [J]. Int. J. Plast., 2017, 89: 96 |
| 55 | Huang M, Xu C, Fan G H, et al. Role of layered structure in ductility improvement of layered Ti-Al metal composite [J]. Acta Mater., 2018, 153: 235 |
| 56 | Mishra R S, Haridas R S, Agrawal P. High entropy alloys—Tunability of deformation mechanisms through integration of compositional and microstructural domains [J]. Mater. Sci. Eng., 2021, A812: 141085 |
| 57 | Raabe D, Sun B H, Da Silva A K, et al. Current challenges and opportunities in microstructure-related properties of advanced high-strength steels [J]. Metall. Mater. Trans., 2020, 51A: 5517 |
| 58 | Sun B H, Ma Y, Vanderesse N, et al. Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface [J]. Acta Mater., 2019, 178: 10 |
| 59 | Ma Y, Sun B H, Schökel A, et al. Phase boundary segregation-induced strengthening and discontinuous yielding in ultrafine-grained duplex medium-Mn steels [J]. Acta Mater., 2020, 200: 389 |
| 60 | Liu Y F, Cao Y, Mao Q Z, et al. Critical microstructures and defects in heterostructured materials and their effects on mechanical properties [J]. Acta Mater., 2020, 189: 129 |
| 61 | Flipon B, Keller C, Quey R, et al. A full-field crystal-plasticity analysis of bimodal polycrystals [J]. Int. J. Solids Struct., 2020, 184: 178 |
| 62 | Zhang Y, Zhang X C, Jia Y F, et al. High density of interfaces with severely mechanical difference controlled high ductility in heterogeneous materials based on crystal plasticity [J]. Metall. Mater. Trans. A, 2022, DOI: 10.1007/s11661-022-06794-z . |
| 63 | Lu L, Chen X, Huang X, et al. Revealing the maximum strength in nanotwinned copper [J]. Science, 2009, 323: 607 |
| 64 | Shen Y F, Lu L, Lu Q H, et al. Tensile properties of copper with nano-scale twins [J]. Scr. Mater., 2005, 52: 989 |
| 65 | Wang L H, Du K, Yang C P, et al. In situ atomic-scale observation of grain size and twin thickness effect limit in twin-structural nanocrystalline platinum [J]. Nat. Commun., 2020, 11: 1167 |
| 66 | Zhang Y, Tao N R, Lu K. Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles [J]. Acta Mater., 2008, 56: 2429 |
| 67 | Lu L, Lu K. Metallic materials with nano-scale twins [J]. Acta Metall. Sin., 2010, 46: 1422 |
| 67 | 卢 磊, 卢 柯. 纳米孪晶金属材料 [J]. 金属学报, 2010, 46: 1422 |
| 68 | Zhu Y T, Liao X Z, Wu X L. Deformation twinning in nanocrystalline materials [J]. Prog. Mater. Sci., 2012, 57: 1 |
| 69 | Li X Y, Wei Y J, Lu L, et al. Dislocation nucleation governed softening and maximum strength in nano-twinned metals [J]. Nature, 2010, 464: 877 |
| 70 | Ullman R. Deformation kinetics, A. S. Krausz and H. Eyring, Wiley-Interscience, New York, 1975, 398 pp. $24.95 [Z]. J. Polym. Sci.: Polym. Lett. Ed., 1976: 245 |
| 71 | Lu L, Dao M, Zhu T, et al. Size dependence of rate-controlling deformation mechanisms in nanotwinned copper [J]. Scr. Mater., 2009, 60: 1062 |
| 72 | Zhao Y H, Liao X Z, Horita Z, et al. Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu-Zn alloys [J]. Mater. Sci. Eng., 2008, A493: 123 |
| 73 | You Z S, Li X Y, Gui L J, et al. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals [J]. Acta Mater., 2013, 61: 217 |
| 74 | Zhang S, Zhou J Q, Wang L, et al. Effect of twin boundaries on nanovoid growth based on dislocation emission [J]. Mater. Sci. Eng., 2013, A582: 29 |
| 75 | Sun L G, He X Q, Zhu L L, et al. Two softening stages in nanotwinned Cu [J]. Philos. Mag., 2014, 94: 4037 |
| 76 | Zhu L L, Qu S X, Guo X, et al. Analysis of the twin spacing and grain size effects on mechanical properties in hierarchically nanotwinned face-centered cubic metals based on a mechanism-based plasticity model [J]. J. Mech. Phys. Solids, 2015, 76: 162 |
| 77 | Yuan F P, Wu X L. Size effects of primary/secondary twins on the atomistic deformation mechanisms in hierarchically nanotwinned metals [J]. J. Appl. Phys., 2013, 113: 203516 |
| 78 | Zhu L L, Kou H N, Lu J. On the role of hierarchical twins for achieving maximum yield strength in nanotwinned metals [J]. Appl. Phys. Lett., 2012, 101: 081906 |
| 79 | Li L, Zhu Y L. Microstructure characteristics of ultrasound-aided deep rolling treated Ti6Al4V alloy [J]. Rare Met. Mater. Eng., 2010, 39: 1754 |
| 79 | 李 礼, 朱有利. Ti6Al4V合金超声深滚层的组织结构特征 [J]. 稀有金属材料与工程, 2010, 39: 1754 |
| 80 | Lapovok R, Orlov D, Timokhina I B, et al. Asymmetric rolling of interstitial-free steel using one idle roll [J]. Metall. Mater. Trans., 2012, 43A: 1328 |
| 81 | Dehm G, Jaya B N, Raghavan R, et al. Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales [J]. Acta Mater., 2018, 142: 248 |
| 82 | Gao H L, Chen S M, Mao L B, et al. Mass production of bulk artificial nacre with excellent mechanical properties [J]. Nat. Commun., 2017, 8: 287 |
| 83 | Hosemann P, Shin C, Kiener D. Small scale mechanical testing of irradiated materials [J]. J. Mater. Res., 2015, 30: 1231 |
| 84 | Yang Z, Zheng J Y, Zhan K, et al. Surface characteristic and wear resistance of S960 high-strength steel after shot peening combing with ultrasonic sprayed graphene oxide coating [J]. J. Mater. Res. Technol., 2022, 18: 978 |
| 85 | Jayalakshmi M, Huilgol P, Bhat B R, et al. Insights into formation of gradient nanostructured (GNS) layer and deformation induced martensite in AISI 316 stainless steel subjected to severe shot peening [J]. Surf. Coat. Technol., 2018, 344: 295 |
| 86 | Lu K, Lu J. Surface nanocrystallization (SNC) of metallic materials—Presentation of the concept behind a new approach [J]. J. Mater. Sci. Technol., 1999, 15: 193 |
| 87 | Lu K, Lu J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment [J]. Mater. Sci. Eng., 2004, A375-377: 38 |
| 88 | Li W L, Tao N R, Lu K. Fabrication of a gradient nano-microstructured surface layer on bulk copper by means of a surface mechanical grinding treatment [J]. Scr. Mater., 2008, 59: 546 |
| 89 | Chui P F, Sun K N, Sun C, et al. Effect of surface nanocrystallization induced by fast multiple rotation rolling on mechanical properties of a low carbon steel [J]. Mater. Des., 2012, 35: 754 |
| 90 | Wang T, Wang D P, Liu G, et al. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing [J]. Appl. Surf. Sci., 2008, 255: 1824 |
| 91 | Geng J L, Yan Z F, Zhang H X, et al. Effect of ultrasonic surface rolling process on microstructure and properties of AZ31B magnesium alloy [J]. Surf. Technol., 2022, 51(1): 368 |
| 91 | 耿纪龙, 闫志峰, 张红霞 等. 超声表面滚压处理对AZ31B镁合金组织和性能的影响 [J]. 表面技术, 2022, 51(1): 368 |
| 92 | Zhang Y L, Lai F Q, Qu S G, et al. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel [J]. Surf. Coat. Technol., 2019, 366: 321 |
| 93 | Cao X J, Pyoun Y S, Murakami R. Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification [J]. Appl. Surf. Sci., 2010, 256: 6297 |
| 94 | Zhang K M, Wang J, Liu Y X, et al. Active and passive compliant force control of ultrasonic surface rolling process on a curved surface [J]. Chin. J. Aeronaut., 2022, 35: 289 |
| 95 | Zhang C, Wang Y F, Lv H Y, et al. Enhanced load transfer and ductility in Al-9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing [J]. Mater. Sci. Eng., 2021, A821: 141591 |
| 96 | Moazzen P, Toroghinejad M R. Enhancement of mechanical properties of a novel single phase Ni1.5FeCrCu0.5 HEA through cold rolling and subsequent annealing [J]. Mater. Sci. Eng., 2022, A848: 143360 |
| 97 | Sabooni S, Karimzadeh F, Enayati M H, et al. The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel [J]. Mater. Sci. Eng., 2015, A636: 221 |
| 98 | Babapour A, Hosseinipour S J, Jamaati R, et al. Effect of antimony addition and asymmetric cold rolling on the texture and magnetic properties of a 1.2% Si steel [J]. J. Magn. Magn. Mater., 2022, 554: 169258 |
| 99 | Ren X W, Huang Y C, Liu Y, et al. Evolution of microstructure, texture, and mechanical properties in a twin-roll cast AA6016 sheet after asymmetric rolling with various velocity ratios between top and bottom rolls [J]. Mater. Sci. Eng., 2020, A788: 139448 |
| 100 | Oliveira P H F, Magalhães D C C, Unti L F K, et al. Tailoring the microstructure of a Cu-0.7Cr-0.07Zr alloy submitted to ECAP at cryogenic temperature for improved thermal stability [J]. Mater. Charact., 2022, 190: 112045 |
| 101 | Sun C, Liu H, Wang C, et al. Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance [J]. J. Alloys Compd., 2022, 911: 165046 |
| 102 | Li L Y, Ou L, Fan C H, et al. Research progress of accumulative roll bonding [J]. Packaging J., 2021, 13(4): 70 |
| 102 | 李林艳, 欧 玲, 范才河 等. 累积叠轧技术研究进展 [J]. 包装学报, 2021, 13(4): 70 |
| 103 | Ma X L, Huang C X, Xu W Z, et al. Strain hardening and ductility in a coarse-grain/nanostructure laminate material [J]. Scr. Mater., 2015, 103: 57 |
| 104 | Cheng Z, Zhou H F, Lu Q H, et al. Extra strengthening and work hardening in gradient nanotwinned metals [J]. Science, 2018, 362: eaau1925 |
| 105 | Aliofkhazraei M, Walsh F C, Zangari G, et al. Development of electrodeposited multilayer coatings: A review of fabrication, microstructure, properties and applications [J]. Appl. Surf. Sci. Adv., 2021, 6: 100141 |
| 106 | Daryadel S, Behroozfar A, Morsali S R, et al. Localized pulsed electrodeposition process for three-dimensional printing of nanotwinned metallic nanostructures [J]. Nano Lett., 2018, 18: 208 |
| 107 | Ameyama K, Cazes F, Couque H, et al. Harmonic structure, a promising microstructure design [J]. Mater. Res. Lett., 2022, 10: 440 |
| 108 | Tan C L, Chew Y, Weng F, et al. Laser aided additive manufacturing of spatially heterostructured steels [J]. Int. J. Mach. Tools Manuf., 2022, 172: 103817 |
| 109 | Shen X X, Lian J S, Jiang Z H, et al. High strength and high ductility of electrodeposited nanocrystalline Ni with a broad grain size distribution [J]. Mater. Sci. Eng., 2008, A487: 410 |
| 110 | Shen X, Lian J, Jiang Z, et al. The optimal grain sized nanocrystalline Ni with high strength and good ductility fabricated by a direct current electrodeposition [J]. Adv. Eng. Mater., 2008, 10: 539 |
| 111 | You Z S, Lu L, Lu K. Tensile behavior of columnar grained Cu with preferentially oriented nanoscale twins [J]. Acta Mater., 2011, 59: 6927 |
| 112 | Xue Z M, Zhu Z W, Zhan X F, et al. Manipulating the microstructure of Cu from direct current electrodeposition without additives to overcome the strength-ductility trade-off [J]. Mater. Sci. Eng., 2022, A849: 143499 |
| 113 | Zhang Q, Liu Y, Liu Y S, et al. Enhanced tensile ductility and strength of electrodeposited ultrafine-grained nickel with a desired bimodal microstructure [J]. Mater. Sci. Eng., 2017, A701: 196 |
| 114 | Cui R H, Yu Z M, He Y T, et al. Copper multilayer coating prepared by ultrasonic-electrodeposition [J]. Adv. Mater. Res., 2010, 97-101: 1348 |
| 115 | Ota M, Vajpai S K, Imao R, et al. Application of high pressure gas jet mill process to fabricate high performance harmonic structure designed pure titanium [J]. Mater. Trans., 2015, 56: 154 |
| 116 | Nukui Y, kubozono H, kikuchi S, et al. Fractographic analysis of fatigue crack initiation and propagation in CP titanium with a bimodal harmonic structure [J]. Mater. Sci. Eng., 2018, A716: 228 |
| 117 | Vajpai S K, Ota M, Zhang Z, et al. Three-dimensionally gradient harmonic structure design: An integrated approach for high performance structural materials [J]. Mater. Res. Lett., 2016, 4: 191 |
| 118 | Yang L B, Ren X N, Ge C C, et al. Status and development of powder metallurgy nickel-based disk superalloys [J]. Int. J. Mater. Res., 2019, 110: 901 |
| 119 | Sharma B, Dirras G, Ameyama K. Harmonic structure design: A strategy for outstanding mechanical properties in structural materials [J]. Metals, 2020, 10: 1615 |
| 120 | Torralba J M, Alvaredo P, García-Junceda A. Powder metallurgy and high-entropy alloys: Update on new opportunities [J]. Powder Metall., 2020, 63: 227 |
| 121 | Vajpai S K, Ota M, Watanabe T, et al. The development of high performance Ti-6Al-4V alloy via a unique microstructural design with bimodal grain size distribution [J]. Metall. Mater. Trans., 2015, 46A: 903 |
| 122 | Wang X, Li J, Cazes F, et al. Numerical modeling on strengthening mechanisms of the harmonic structured design on CP-Ti and Ti-6Al-4V [J]. Int. J. Plast., 2020, 133: 102793 |
| 123 | Fu X W, Tan Z Q, Min X R, et al. Trimodal grain structure enables high-strength CNT/Al-Cu-Mg composites higher ductility by powder assembly & alloying [J]. Mater. Res. Lett., 2021, 9: 50 |
| 124 | Lu T W, Yao N, Chen H, et al. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures [J]. Addit. Manuf., 2022, 56: 102918 |
| 125 | Yao N, Lu T W, Feng K, et al. Ultrastrong and ductile additively manufactured precipitation-hardening medium-entropy alloy at ambient and cryogenic temperatures [J]. Acta Mater., 2022, 236: 118142 |
| 126 | Sagong M J, Kim E S, Park J M, et al. Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel [J]. Mater. Sci. Eng., 2022, A847: 143318 |
/
| 〈 |
|
〉 |
