论文

镍基高温合金定向凝固过程中的汇聚型双晶竞争生长*

  • 胡松松 ,
  • 刘林 ,
  • 崔强伟 ,
  • 黄太文 ,
  • 张军 ,
  • 傅恒志
展开
  • 西北工业大学凝固技术国家重点实验室, 西安 710072

收稿日期: 2015-12-07

  网络出版日期: 2016-05-10

基金资助

* 国家自然科学基金项目51331005, 51171151和51501151, 国家高技术研究发展计划项目2012AA03A511, 国家重点基础研究发展计划项目2011CB610406, 陕西省自然科学基金项目2014JM6227, 西北工业大学基础研究基金项目3102014JCQ01022及先进航空发动机协同创新中心项目资助

CONVERGING COMPETITIVE GROWTH IN BI-CRYSTAL OF Ni-BASED SUPERALLOY DURINGDIRECTIONAL SOLIDIFICATION

  • Songsong HU ,
  • Lin LIU ,
  • Qiangwei CUI ,
  • Taiwen HUANG ,
  • Jun ZHANG ,
  • Hengzhi FU
Expand
  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China

Received date: 2015-12-07

  Online published: 2016-05-10

Supported by

Supported by National Natural Science Foundation of China (Nos.51331005, 51171151 and 51501151), High Technology Research and Development Program of China (No.2012AA03A511), National Basic Research Program of China (No.2011-CB610406), Natural Science Foundation of Shaanxi Province (No.2014JM6227), Foundation Research Foundation of Northwestern Polytechnical University (No.3102014JCQ01022) and Advanced Aero Engine Collaborative Innovation Center of China

摘要

采用籽晶法控制晶体取向, 研究了不同抽拉速率下镍基高温合金汇聚型双晶的竞争生长. 结果表明, 低抽拉速率下, 非择优枝晶能够穿插进入择优枝晶间的液相通道, 抑制择优枝晶的生长, 使晶界向择优晶粒方向偏移. 高抽拉速率下, 非择优枝晶几乎全部被晶界择优枝晶阻挡, 晶界与择优枝晶干平行. 非择优枝晶进入择优枝晶间的液相通道使择优枝晶萎缩消失是非择优晶粒淘汰择优晶粒的主要因素, 并以此提出了抽拉速率对竞争生长的影响机制.

本文引用格式

胡松松 , 刘林 , 崔强伟 , 黄太文 , 张军 , 傅恒志 . 镍基高温合金定向凝固过程中的汇聚型双晶竞争生长*[J]. 金属学报, 2016 , 52(8) : 897 -904 . DOI: 10.11900/0412.1961.2015.00631

Abstract

Ni-based single crystal superalloy has been widely used in turbine blades due to its excellent high temperature mechanical behavior. In order to completely exhibit high temperature mechanical properties, the seed method has been used to produce Ni-based single crystal components for [001] orientation paralleling to main force direction. Stray crystals, which unexpectedly nucleate in the melt-back region, will competitively grow with seed during directional solidification. It is important to profoundly understand the mechanism of competitive growth to find ways of overgrowing stray crystal during producing Ni-based single crystal components. However, within the published research there are conflicting views on the mechanism of competitive growth at converging case. Bi-crystal converging competitive growth was investigated in Ni-based single crystal superalloy with different pulling rates using seed technology. A series of polishing and imaging quenching interface were done for the positional relationship of dendrites near grain boundary in 3D reference. It was found that solidification microstruc tures were different with different crystal orientations. Unfavorable oriented dendrite tilting to heat flux restrained favorable oriented dendrite aligning to heat flux mainly thought inserting into the favorable oriented dendrites channel, and this resulted in unfavorable oriented dendrite overgrowing favorable oriented dendrite at low pulling rate. However, at high pulling rate the unfavorable oriented dendrites mainly blocked by grain boundary favorable oriented dendrite and the grain boundary grew paralleling to favorable oriented dendrite core. Favorable oriented dendrite being depressed and vanished, owning to that unfavorable oriented dendrite inserting into favorable oriented dendrites channel result in adjusting primary dendrite spacing, is the main factor to favorable oriented grain overgrew by unfavorable oriented grain. According to above mechanism, effect of pulling rate on competitive growth at converging case was interpreted. This could broaden our understanding of competitive growth at converging case in 3D reference.

参考文献

[1] Harris K, Erickson G L, Schwer R E. Metals Handbook.10th Ed., Vol.1, Ohio: ASM International, 1990: 995
[2] D'Souza N, Newell M, Devendra K, Jennings P A, Ardakani M G, Shollock B A.Mater Sci Eng, 2005; A413: 567
[3] Yang X L, Lee P D, D'Souza N.JOM, 2005; 57(5): 40
[4] Stanford N, Djakovic A, Shollock B A, Mclean M, D'Souza N, Jennings P A.Scr Mater, 2004; 50: 159
[5] Aveson J W, Tennant P A, Foss B J, Shollock B A, Stone H J, D'Souza N.Acta Mater, 2013; 61: 5162
[6] Walton D, Chalmers B.Trans Metall Soc AIME, 1959; 215: 447
[7] Wagner A, Shollock B A, McLean M.Mater Sci Eng, 2004; A374: 207
[8] Zhou Y Z, Volek A, Green N R.Acta Mater, 2008; 56: 2631
[9] Yu H L, Lin X, Li J J, Wang L L, Huang W D.Acta Metall Sin, 2013; 49: 58
[9] (宇红雷, 林鑫, 李俊杰, 王理林, 黄卫东. 金属学报, 2013; 49: 58)
[10] Liu Z Y, Lin M, Yu D E, Zhou X W, Gu Y X, Fu H Z.Metall Mater Tran, 2013; 44A: 5113
[11] Zhang H, Xu Q Y, Sun C B, Qi X, Tang N, Liu B C.Acta Metall Sin, 2013; 49: 1521
[11] (张航, 许庆彦, 孙长波, 戚翔, 唐宁, 刘百成. 金属学报, 2013; 49: 1521)
[12] Rappaz M, Gandin C A, Desbiolles J L, Thevoz P.Metall Mater Trans, 1996; 27A: 695
[13] Rappaz M, Gandin C A.Acta Metall, 1994; 42: 2233
[14] Zhou Y Z, Jin T, Sun X F.Acta Metall Sin, 2010; 46: 1327
[14] (周亦胄, 金涛, 孙晓峰. 金属学报, 2010; 46: 1327)
[15] Li J J, Wang Z J, Wang Y Q, Wang J C.Acta Mater, 2012; 60: 1478
[16] Yang C B, Liu L, Zhao X B, Wang N, Zhang J, Fu H Z.J Alloys Compd, 2013; 578: 557
[17] Zhang X L.PhD Dissertation, University of Chinese Academy of Sciences, Beijing, 2013
[17] (张小丽. 中国科学院大学博士学位论文 ,北京, 2013)
[18] Takaki T, Ohno M, Shibuta Y, Sakane S, Shimokawabe T.J Cryst Growth, 2016; 442: 14
[19] Takaki T, Ohno M, Shimokawabe T, Aoki T.Acta Mater, 2014; 81: 272
[20] Yu H L, Li J J, Lin X, Wang L L, Huang W D.J Cryst Growth, 2014; 402: 210
[21] Zhou Y Z, Sun X F.Sci China Tech Sci, 2012; 55: 1327
[22] Meng X B, Lu Q, Zhang X L, Li J T, Chen Z Q, Wang Y H, Zhou Y Z, Jin T, Sun X F, Hu Z Q.Acta Mater, 2012; 60: 3965
[23] Lu Q, Li J G, Jin T, Zhou Y Z, Sun X F, Hu Z Q.Acta Metall Sin, 2011; 47: 641
[23] (卢琦, 李金国, 金涛, 周亦胄, 孙晓峰, 胡壮麒. 金属学报, 2011; 47: 641)
[24] Sakae S, Takaki T, Ohno M, Shimokawabe T, Aoki T.In: IOP Conference Series: Materials Science and Engineering, 2015; 84: 012063
[25] Han S H, Trivedi R.Acta Metall Mater, 1994; 42: 25
[26] Fu H Z, Guo J J, Liu L, Li J S.Directional Solidification and Processing of Advanced Materials. Beijing: Science Press, 2008: 267
[26] (傅恒志, 郭景杰, 刘林, 李金国. 先进材料定向凝固. 北京: 科学出版社, 2008: 267)
文章导航

/