升温过程中Nb和Nb-Mo微合金化钢中碳化物的析出行为研究
张正延, 男, 1986年生, 博士生
修回日期: 2014-08-02
网络出版日期: 2015-03-25
基金资助
*国家重点基础研究发展计划项目 2010CB630805和国家自然科学基金项目51201036 资助
PRECIPITATION BEHAVIOR OF CARBIDE DURING HEATING PROCESS IN Nb AND Nb-Mo MICRO-ALLOYED STEELS
Revised date: 2014-08-02
Online published: 2015-03-25
Supported by
Supported by National Basic Research Program of China (No.2010CB630805) and National Natural Science Foundation of China (No.51201036)
利用Gleeble热模拟实验机、Vickers硬度计、SEM, HRTEM及DSC研究了淬火态含Nb和Nb-Mo微合金钢在升温过程中碳化物的析出行为. 利用经典形核长大理论及Avrami方程对淬火态钢中MC型碳化物的析出动力学进行了计算. 结果表明, 含Nb和Nb-Mo微合金钢淬火后以20 ℃/min的速率加热至不同温度水冷, 在300和700 ℃, 由于e-碳化物和MC型碳化物析出而出现了硬度峰值. MC型碳化物在650 ℃左右析出, 由于析出强化而硬度上升, 与理论计算得到的MC型碳化物的析出鼻子点温度约650 ℃的结果相一致. Mo进入NbC中降低了NbC与铁素体基体的错配度, 从而减小了析出相与铁素体基体间的界面能, 使得(Nb, Mo)C析出动力学加快, 所以Nb-Mo钢中析出相粒子分布更为密集, 尺寸更为细小, 具有较高的析出强化作用.
张正延 , 李昭东 , 雍岐龙 , 孙新军 , 王振强 , 王国栋 . 升温过程中Nb和Nb-Mo微合金化钢中碳化物的析出行为研究[J]. 金属学报, 2015 , 51(3) : 315 -324 . DOI: 10.11900/0412.1961.2014.00424
As an important carbide forming element, Nb plays an important role in steel. Precipitated Nb can restrain the austenite grain growth during soaking process and provide precipitation strengthening after g /a phase transformation. Precipitated or dissolved Nb can inhibit recrystallizaton of deformed austenite. Recently, both Nb and Mo are added in steel to enhance the role of Nb. However, these kinds of researches mostly focused on continual cooling process of g /a transformation or isothermal process during tempering, and precipitation behavior of MC-type carbide in steel containing Nb and Mo during reheating process and the effect of Mo on precipitation of NbC in ferrite were rarely reported. Therefore, in this work, precipitation behaviors of MC-type carbide and the synergistic effect of Nb and Mo in steel containing Nb or Nb-Mo during reheating process at the heat rate 20 ℃/min were investigated by means of Vickers hardness test, SEM, HRTEM and DSC. The results show that both Nb and Nb-Mo steels have hardness peaks at 300 and 700 ℃, which are attributed to the precipitation of e-carbide and MC-type carbide, respectively. The MC-type carbide precipitates at about 650 ℃ during reheating process, which is in a good agreement with the nose temperature of MC-type carbide calculated by Avrami equation. (Nb, Mo)C particle forming in Nb-Mo steel during precipitation has a small mismatch with ferrite matrix compared with NbC, leading to the decrease of interfacial energy. Thus, the precipitation kinetic of MC-type carbide in Nb-Mo steel is faster than that in Nb steel, which results in the denser and finer MC-type carbide and higher precipitation strengthening effect.
Key words： carbide; precipitation; Vickers hardness; interfacial energy
| [1] | Yong Q L,Ma M T,Wu B R.Micro-Alloyed Steels-Physical Mechanical Metallurgy. Beijing: China Machine Press, 1989: 30 |
| [1] | (雍岐龙,马鸣图,吴宝榕. 微合金钢-物理和力学冶金. 北京: 机械工业出版社, 1989: 30) |
| [2] | De Ardo A J. In: Fu J Y, Wang W Z eds., Niobium Science & Technology. Beijing: Metallurgical Industry Press, 2003: 271 |
| [2] | (De Ardo A J. 见:付俊岩, 王伟哲主编, 铌科学与技术. 北京: 冶金工业出版社, 2003: 271) |
| [3] | Rainforth W M, Black M P, Higginson R L, Palmiere E J, Sellars C M, Prabst I, Warbichler P, Hofer F. Acta Mater, 2002; 50: 735 |
| [4] | Cao Y B, Xiao F R, Qiao G Y, Huang C J, Zhang X B, Wu Z X, Liao B. Mater Sci Eng, 2012; A552: 502 |
| [5] | Zhang Z H, Liu Y N, Liang X K, She Y. Mater Sci Eng, 2008; A474: 254 |
| [6] | Park D B, Huh M Y, Shim J H, Suh J Y, Lee K H, Jung W S. Mater Sci Eng, 2013; A560: 528 |
| [7] | Weng Y Q. Ultra-Fine Grained Steels. Beijing: Metallurgical Industry Press, 2008: 58 |
| [7] | (翁宇庆. 超细晶钢. 北京: 冶金工业出版社, 2008: 58) |
| [8] | Huang G J, Kong X L, Guan J, An X G. Microalloying Technol, 2009; 3-4: 293 |
| [8] | (黄国建, 孔祥磊, 关菊, 安晓光. 微合金化技术, 2009; 3-4: 293) |
| [9] | Chi H X, Ma D S, Liu J H, Chen Z Z, Yong Q L. Microalloying Technol, 2009; 3-4; 427 |
| [9] | (迟宏宵, 马党参, 刘建华, 陈再枝, 雍岐龙. 微合金化技术, 2009; 3-4: 427) |
| [10] | Chijiiwa R, Tamehiro H, Yoshida Y, Funato K, Uemori R, Horii Y. Nippon Steel Tech Report, 1993; 58: 47 |
| [11] | Cao J C, Yong Q L, Liu Q Y, Sun X J. J Mater Sci, 2007; 42: 10080 |
| [12] | Uemori R, Chijiiwa R, Tamehiro H, Moriawa H. Appl Surf Sci, 1994; 76-77: 255 |
| [13] | Yu H, Zhang D D, Xiao R T, Zhuo P, Li C M. J Univ Sci Technol Beijing, 2011; 33: 715 |
| [13] | (于 浩, 张道达, 肖荣亭, 周 平, 李灿明. 北京科技大学学报, 2011; 33: 715 ) |
| [14] | Yang G W, Sun X J, Li Z D, Li X X, Yong Q L. Mater Sci Technol, 2013; 21: 118 |
| [14] | (杨庚蔚, 孙新军, 李昭东, 李晓闲, 雍岐龙. 材料科学与工艺, 2013; 21: 118) |
| [15] | Liu Q D, Liu W Q, Wang Z M, Zhou B X. Acta Metall Sin, 2009; 45: 1281 |
| [15] | (刘庆冬, 刘文庆, 王泽民, 周邦新. 金属学报, 2009; 45: 1281) |
| [16] | Liu Q D, Peng J C, Liu W Q, Zhou B X. Acta Metall Sin, 2009; 45: 1288 |
| [16] | (刘庆冬, 彭剑超, 刘文庆, 周邦新. 金属学报, 2009; 45: 1288) |
| [17] | Liu Q D, Chu Y L, Peng J C, Liu W Q, Zhou B X. Acta Metall Sin, 2009; 45: 1297 |
| [17] | (刘庆冬, 褚于良, 彭剑超, 刘文庆, 周邦新. 金属学报, 2009; 45: 1297) |
| [18] | Yong Q L. Secondary Phase in Steels. Beijing: Metallurgical Industry Press, 2006: 361 |
| [18] | (雍岐龙. 钢铁材料中的第二相. 北京: 冶金工业出版社, 2006: 361) |
| [19] | Olasolo M, Uranga P, Rodriguez J. M, Lopea. Mater Sci Eng, 2011; A528: 2559 |
| [20] | Duan L N, Chen Y, Liu Q Y, Jia S J, Jia C C. J Iron Steel Int, 2014; 21: 227 |
| [21] | Wang L J, Cai Q W, Wu H B, Yu W. J Univ Sci Technol Beijing, 2010; 32: 1150 |
| [21] | (王立军, 蔡庆伍, 武会宾, 余 伟. 北京科技大学学报, 2010; 32: 1150) |
| [22] | Pan J S,Tong J M,Tian M B. Fundamentals of Material Science. Beijing: Tsinghua University Press, 2011: 660 |
| [22] | (潘金生,仝健民,田民波. 材料科学基础. 北京: 清华大学出版社, 2011: 660) |
| [23] | Cao J C, Yong Q L, Liu Q Y, Sun X J. Trans Mater Heat Treat, 2006; 27(5): 51 |
| [23] | (曹建春, 雍岐龙, 刘清友, 孙新军. 材料热处理学报, 2006; 27(5): 51) |
| [24] | Jang J H, Lee C H, Heo Y U, Suh D W. Acta Mater, 2012; 60: 208 |
| [25] | Sakuma T, Watanabe N, Nishizawa T. Trans JIM, 1980; 21: 159 |
| [26] | Zhao P,Xie F Z,Sun Z G.Materials Science Essentials. Harbin: Harbin Institute of Technology Press, 2009: 226 |
| [26] | (赵 品,谢辅洲,孙振国.材料科学基础教程.哈尔滨: 哈尔滨工业大学出版社, 2009: 226) |
| [27] | Wang Z Q, Yong Q L, Sun X J, Yang Z G, Li Z D, Zhang C, Weng Y Q. ISIJ Int, 2012; 52: 1661 |
| [28] | Denton A R, Ashcroft N W. Phys Rev, 1991; 43A: 3161 |
| [29] | Qadri S B, Fuller W W, Kihlstrom K E, Simon R W, Skelton E F, VanVechten D, Wolf S. A. J Vacuum Sci Technol, 1985; 3A: 664 |
| [30] | Willens R H, Buehler E, Matthias B T. Phys Rev, 1967; 159: 327 |
| [31] | Wang Z Q, Sun X J, Yang Z G, Yong Q L, Zhang C, Li Z D, Weng Y Q. Mater Sci Eng, 2013; A573: 84 |
/
| 〈 |
|
〉 |
