论文

非共晶点合金跃迁加速定向凝固下耦合共晶组织生长的理论分析

  • 李双明 ,
  • 傅恒志
展开
  • 西北工业大学凝固技术国家重点实验室, 西安 710072
李双明, 男, 1971年生, 教授

收稿日期: 2013-07-22

  修回日期: 2013-08-23

  网络出版日期: 2013-12-11

基金资助

国家自然科学基金项目50971101和51074127及凝固技术国家重点实验室开放课题SKLSP201010资助

THEORETICAL ANALYSIS OF AN ABRUPT INCREASE IN GROWTH RATE ON THE DIRECTIONALLY SOLIDIFIED MICROSTRUCTURES OF OFF—EUTECTIC ALLOYS

  • LI Shuangming ,
  • FU Hengzhi
Expand
  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072

Received date: 2013-07-22

  Revised date: 2013-08-23

  Online published: 2013-12-11

摘要

基于最高界面生长温度的判据,对定向凝固跃迁过程中非共晶点合金从共晶耦合区向非耦合区组织生长进行了理论分析,探讨了耦合共晶和初生枝晶之间的竞争生长. 发现在共晶非共生区,跃迁加速定向凝固后的共晶组织仍可以耦合生长, 给出了可能耦合生长的临界速率.另外, 利用该理论对两种典型的共晶体系:Al—40%Cu层片共晶和Al—12%Ni棒状共晶合金进行了跃迁定向凝固耦合共晶组织生长分析,理论预测的临界速率与实验报道的结果基本一致.

本文引用格式

李双明 , 傅恒志 . 非共晶点合金跃迁加速定向凝固下耦合共晶组织生长的理论分析[J]. 金属学报, 2013 , 49(12) : 1543 -1548 . DOI: 10.3724/SP.J.1037.2013.00428

Abstract

Coupled growth eutectic microstructures at an abrupt increase in growth rate in directional solidification of off—eutectic alloys have been analyzed based on the maximum interface growth temperature criteria. The abrupt growth rate possibly required for the growth of coupled eutectics during the abrupt increase in growth rate is obtained by considering the competitive growth between the eutectic and primary dendrites. The theoretical predictions show that the eutectics can grow out of coupled zone, differing from the conventional eutectic solidification concept that indicates the entirely coupled eutectics only form within the coupled zone. In addition, the theoretical analysis are employed in two kinds of regular eutectics such as lamellar eutectic in the Al—40% Cu hypereutectic alloy and rod eutectic in the Al—12 %Ni hypereutectic alloy; a good agreement between the theoretical calculation results and reported experimental data has been achieved.

参考文献

[1] Liu S, Lee J H, Trivedi R.  Acta Mater, 2011; 59: 3102

[2] Parisi P, Plapp M.  Acta Mater, 2008; 56: 1348
[3] Shankar S, Riddle Y W, Makhlouf M M.  Acta Mater, 2004; 52: 4447
[4] Fu H Z, Guo J J, Liu L, Li J S.  Directional Solidification and Processing of Advanced Materials. Beijing: Science Press, 2008: 282
(傅恒志, 郭景杰, 刘林, 李金山. 先进材料定向凝固. 北京: 科学出版社,2008: 282)
[5] Bei H, George E P, Kenik E A, Pharr G M.  Acta Mater, 2003; 51: 6241
[6] Li S M, Ma B L, Li X X, Liu L, Fu H Z.  Sci China, 2005; 48E: 270
[7] Li S M, Song Y P, Ma B L, Tang L, Fu H Z.  Mater Sci Eng, 2008; A475: 117
[8] Li S M, Quan Q R, Li X L, Fu H Z.  J Crystal Growth, 2011; 314: 279
[9] Peng P, Li X Z, Liu D M, Su Y Q, Guo J J, Fu H Z.  Acta Metall Sin, 2013; 49: 311
(彭鹏, 李新中, 刘冬梅, 苏彦庆, 郭景杰, 傅恒志. 金属学报, 2013; 49: 311)
[10] Hunziker O, Vandyoussefi M, Kurz W.  Acta Mater, 1998; 46: 6325
[11] Kurz W, Fisher D J.  Fundamentals of Solidification. 4th Ed., Zurich: Trans Tech Publication,1998: 261
[12] Trivedi R, Kurz W. In: Stefanescu D M, Agaschian G J, Bayuzik R J, eds.,Solidification Processing of Eutectic Alloys. Warrendale, PA: TMS/AIME, 1988: 3
[13] Dantzig J A, Rappaz M.  Solidification. Swiss: EPFL Press, 2009: 354
[14] Seetharaman V, Trivedi R. In: Stefanescu D M, Agaschian G J, Bayuzik R J, eds.,Solidification Processing of Eutectic Alloys. Warrendale, PA: TMS/AIME, 1988: 65
[15] Zhao P, Li S M, Fu H Z.  Acta Metall Sin, 2012; 48: 33
(赵朋, 李双明, 傅恒志. 金属学报, 2012; 48: 33)
[16] Kurz W.  Adv Eng Mater, 2001; 3: 443
[17] Hu H Q.  Fundamental of Metals Solidification. 2nd Ed., Beijing: China Machine Press, 2002: 120
(胡汉起. 金属凝固原理. 第2版, 北京: 机械工业出版社, 2000: 120)
[18] Lee J H, Liu S, Trivedi R.  Metall Mater Trans, 2005; 36A: 3111
[19] Tourret D, Gandin C A.  Acta Mater, 2009; 57: 2066

[20] Gill G C, Kurz W.  Acta Metall Mater, 1993; 41: 3563

文章导航

/