镍基粉末高温合金FGH96中原始粉末颗粒边界的形成机理

马文斌; 刘国权; 胡本芙; 贾成厂

doi:10.3724/SP.J.1037.2013.00125

金属学报 >

2013 , Vol. 49 >Issue 10: 1248 - 1254

DOI: https://doi.org/10.3724/SP.J.1037.2013.00125

论文

镍基粉末高温合金FGH96中原始粉末颗粒边界的形成机理

马文斌 ,
刘国权 ,
胡本芙 ,
贾成厂

展开

1) 北京科技大学材料科学与工程学院, 北京 100083
2) 北京科技大学新金属材料国家重点实验室, 北京 100083

马文斌, 男, 1986年生, 博士生

收稿日期: 2013-03-20

修回日期: 2013-07-16

网络出版日期: 2013-10-11

基金资助

国家重点基础研究发展计划项目2010CB631204和国家自然科学基金项目51071019资助

收起

FORMATION OF PREVIOUS PARTICLE BOUNDARY OF NICKEL BASE PM SUPERALLOY FGH96

MA Wenbin ,
LIU Guoquan ,
HU Benfu ,
JIA Chengchang

Expand

1) School of Materials Science and Engineering, University of Science and Technology Beijing, Bejing 100083
2) State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing,Beijing 100083

Received date: 2013-03-20

Revised date: 2013-07-16

Online published: 2013-10-11

Fold

摘要

利用碳复型萃取技术和先进测试方法对我国生产的FGH96合金中形成的原始粉末颗粒边界(previous particle boundaries, PPB)进行研究.结果表明, PPB的实质是析出相沿原始粉末颗粒边界连续或半连续分布而呈现出的组织形貌.PPB析出相组成受热等静压(HIP)温度影响, 当高于γ′相固溶温度, HIP得到的PPB析出相主要为MC(M主要为Ti, Nb和Zr)型碳化物, 低于固溶温度时则为MC和γ′相.PPB析出相形成于高温高压固化成型过程中,粉末表面层固溶体中偏析的C和Ti等溶质元素与粉末表面上吸附的O发生化学反应形成PPB析出相,而粉末表面MC型碳化物及γ′相形成元素的富集促进了这一反应的进行.PPB的形成是由粉末表面固有原子结构与合金元素偏析等特性决定的, 难以彻底消除,只能选择合适的粉末尺寸和控制致密化成型工艺参数来使PPB最小化.

关键词： 粉末高温合金; γ′相; MC碳化物; 热等静压

本文引用格式

马文斌 , 刘国权 , 胡本芙 , 贾成厂 . 镍基粉末高温合金FGH96中原始粉末颗粒边界的形成机理[J]. 金属学报, 2013 , 49(10) : 1248 -1254 . DOI: 10.3724/SP.J.1037.2013.00125

Abstract

The previous particle boundaries (PPB) introduced in the PM (powder metallurgy) superalloys during their fabrication process are deleterious to the mechanical properties of the superalloys. The elimination and the minimization of the PPB are the keys to promote the metallurgical quality of the PM superalloys. The carbon replica methods and advanced analytic techniques were utilized to study the PPB formed in FGH96 alloy. The result shows that the multi--element carbides and largeγ′ phase decorate the outline of the PPB. The PPB precipitates in the alloy which is hot isostatic pressed (HIPed) below the solution temperature of theγ′phase are mainlyγ′ phase and MC (the metalic elements are mainly Ti,Nb and Zr), while those in the alloy HIPed above the temperature are MC.The supersaterated solutes on the powder surface react with the carbon andoxygen of the surface during the HIP process, which leads to theformation of the PPB precipitates. Besides, the segregation of the MC andγ′ phase forming elements speed up the reaction above. The characteristics and the elements segregation of the initial powder surface inevitably lead to the formation of PPB and, as a result, the PPB can not be completely eliminated. Selecting proper size range of the initial powders for HIP and strict controls of the HIP parameters are the key tominimizing the PPB.

Key words： powder matallurgy superalloy; γ′ phase; MC carbide; HIP

参考文献

[1] Zhang Y W, Shangguan Y H. Powder Metall Ind, 2004; 14(6): 30

(张义文, 上官永恒. 粉末冶金工业, 2004; 14(6): 30)

[2] Zhang Y W. J Iron Steel Res, 2002; 14(3): 73

(张义文. 钢铁研究学报, 2002; 14(3): 73)

[3] Zhang Y, Zhang Y W, Song P S, Zhang F G, Tao Y, Chen X C, Yang S Z. J Iron Steel Res,2003; 15(6): 71

(张莹, 张义文, 宋璞生, 张凤戈, 陶宇, 陈希春, 杨仕仲. 钢铁研究学报, 2003; 15(6): 71)

[4] Hu B F, Li H Y, Zhang S H. Acta Metall Sin, 1987; 23: 96

(胡本芙, 李慧英, 章守华. 金属学报, 1987; 23: 96)

[5] Waters R E, Charles J A, Lea C. Met Technol, 1981; 5: 194

[6] Larson J M. Met Trans, 1974; 8: 537

[7] Mao J, Yang W H, Wang W X, Zou J W, Zhou R F. Acta Metall Sin, 1993; 29: 187

(毛健, 杨万宏, 汪武翔, 邹金文, 周瑞发. 金属学报, 1993; 29: 187)

[8] Yang W H, Mao J, Wang W X, Zou J W, Zhou R W. Adv Perform Mater, 1995; 2: 269

[9] Zhang Y, Zhang Y W, Zhang N, Liu M D, Liu J T. Acta Metall Sin, 2010; 46: 444

(张莹, 张义文, 张娜, 刘明东, 刘建涛. 金属学报, 2010; 46: 444)

[10] Guo W M, Dong J X, Wu J T, Zhang F G, Chen G S, Chen S D. Iron Steel Res, 2005; 17(1): 59

(国为民, 董建新, 吴剑涛, 张凤戈, 陈淦生, 陈生大. 钢铁研究学报, 2005; 17(1): 59)

[11] Jia J, Tao Y, Zhang Y W, Zhang Y. J Aeronaut Mater, 2008; 28(3): 20

(贾建, 陶宇, 张义文, 张莹. 航空材料学报, 2008; 28(3): 20)

[12] Zhao J P, Tao Y, Yuan S Q, Jia J, Han S B. Powder Metall Technol, 2010; 20(4): 43

(赵军普, 陶宇, 袁守谦, 贾建, 韩寿波. 粉末冶金工业, 2010; 20(4): 43)

[13] Ingesten N G, Warren R, Winberg L. In: Brunetaud R, Cout S D, Gibbons T B,Lindblom Y, Meadowcr D B, Stickler R eds., High Temperature Alloys for Gas Turbines 1982.Boston: Reidel Publishing Company, 1982: 1013

[14] Ann M R, Michael F H. J Mater Sci, 1982; 17: 73

[15] Rao G A, Srinivas M, Sarma D S. Mater Sci Eng, 2006; 418: 282

[16] Wu K, Liu G Q, Hu B F, Li F, Zhang Y W, Tao Y, Liu J T. Mater Charact, 2012; 73: 68

[17] Zhang L, Liu H S, He X B, Ding R U, Qu X H. Mater Charact, 2012; 67: 52

[18] Hu B F, Chen H M, Song D. Acta Metall Sin, 2005; 41: 1042

(胡本芙, 陈焕铭, 宋铎. 金属学报, 2005; 41: 1042)

[19] Murata Y, Kiyoshi S, Natsuo Y. J Mater Sci, 1986; 21: 3653

[20] Hu B F, Li H Y, Zhang S H, Mao J, Zhou R F. Acta Metall Sin, 1991; 27: 191

(胡本芙, 李慧英, 章守华, 毛健, 周瑞发. 金属学报, 1991; 27: 191)

[21] Liu M D, Zhang Y, Liu P Y, Zhang Y W. Powder Metall Ind, 2006; 16(3): 1

(刘明东, 张莹, 刘培英, 张义文. 粉末冶金工业, 2006; 16(3): 1)

[22] Tian G F. PhD Dissertation, University of Science and Technology Beijing, 2008

(田高峰. 北京科技大学博士学位论文, 2008)

[23] Li H Y, Hu B F, Zhang S H. J Beijing Univ Sci Technol, 1987; 6(2): 40

(李慧英, 胡本芙, 章守华. 北京钢铁学院学报, 1987; 6(2): 40)

[24] Hu B F, Chen H M, Song D, Li H Y. Acta Metall Sin, 2003; 39: 470

(胡本芙, 陈焕铭, 宋铎, 李慧英. 金属学报, 2003; 39: 470)

[25] Li H Y, Hu B F, Zhang S H. Acta Metall Sin, 1987; 23: B90

(李慧英, 胡本芙, 章守华. 金属学报, 1987; 23: B90)

[26] Dahlen M, Ingesten N G, Fischmeister H. In: Hausner H H ed.,Modern Developments in Powder Metallurgy Proceedings. New York: Plenum Press, 1981: 3

[27] Menzies R G, Bricknell R H, Craven A J. Philos Mag, 1980; 41A: 493

[28] Liu J T, Zhang Y W. Chin J Nonferrous Met, 2012; 22: 2797

(刘建涛, 张义文. 中国有色金属学报, 2012; 22: 2797)

[29] Yang W H, Yu K L, Lai H Y, Yan M G. J Aeronaut Mater, 1993; 13(1): 22

(杨万宏, 俞克兰, 赖和怡, 严鸣皋. 航空材料学报, 1993; 13(1): 22)

[30] Yang W H. PhD Dissertation, Beijing Institute of Aeronautical Materials, 1992

(杨万宏. 北京航空材料研究所博士学位论文, 1992)

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献