添加Nb对Zr-4合金在500 ℃过热蒸汽中耐腐蚀性能的影响

姚美意; 李士炉; 张欣; 彭剑超; 周邦新; 赵旭山; 沈剑韵

doi:10.3724/SP.J.1037.2011.00106

金属学报 >

2011 , Vol. 47 >Issue 7: 865 - 871

DOI: https://doi.org/10.3724/SP.J.1037.2011.00106

论文

添加Nb对Zr-4合金在500 ℃过热蒸汽中耐腐蚀性能的影响

姚美意 ,
李士炉 ,
张欣 ,
彭剑超 ,
周邦新 ,
赵旭山 ,
沈剑韵

展开

1) 上海大学材料研究所, 上海 200072
2) 上海大学微结构重点实验室, 上海 200444
3) 北京有色金属研究总院, 北京 100088

姚美意, 女, 1973年生, 副研究员

收稿日期: 2011-03-03

修回日期: 2011-03-21

网络出版日期: 2011-07-11

基金资助

国家自然科学基金项目50871064和50971084, 国家高新技术研究发展计划项目2008AA031701, 上海市自然科学基金项目09ZR1411700及上海市重点学科建设项目S30107资助

收起

EFFECT OF Nb ON THE CORROSION RESISTANCE OF Zr-4 ALLOY IN SUPERHEATED STEAM AT 500 ℃

YAO Mei-Yi ,
LI Shi-Lu ,
ZHANG Xin ,
PENG Jian-Tiao ,
ZHOU Bang-Xin ,
DIAO Xu-Shan ,
CHEN Jian-Yun

Expand

1) Institute of Materials, Shanghai University, Shanghai 200072
2) Laboratory for Microstructures, Shanghai University, Shanghai 200444
3) General Research Institute for Nonferrous Metal, Beijing 100088

Received date: 2011-03-03

Revised date: 2011-03-21

Online published: 2011-07-11

Supported by

Supported by National Natural Science Foundation of China (Nos.50871064 and 50971084), High Technology Research and Development Program of China (No.2008AA031701), Natural Science Foundation of Shanghai (No.09ZR1411700) and Shanghai Leading Academic Discipline Project (No.S30107)

Fold

摘要

用高压釜腐蚀实验研究了在Zr-4合金成分基础上添加0.1\%-0.3\%(质量分数)Nb的合金在500 ℃/10.3 MPa过热蒸汽中的耐腐蚀性能, 用TEM和SEM分别观察了合金的显微组织和氧化膜断口形貌. 结果表明, 合金在500 ℃/10.3 MPa过热蒸汽中腐蚀500 h均未出现疖状腐蚀, 完全抑制了疖状腐蚀的产生, 这与Nb在α-Zr中的固溶量较大有关, 固溶在α-Zr中的Nb能抑制疖状腐蚀斑的形核, 提高耐疖状腐蚀性能; 合金耐均匀腐蚀性能随着Nb含量的增加而降低, 这与Nb的添加降低了固溶在 α-Zr中的(Fe+Cr)含量有关, 也与Zr(Fe, Cr, Nb)₂第二相的析出有关, 这2种因素都会加快氧化膜显微组织在腐蚀过程中的演化, 促进孔隙和微裂纹的形成.

关键词： 锆合金; Nb; 疖状腐蚀; 显微组织

本文引用格式

姚美意 , 李士炉 , 张欣 , 彭剑超 , 周邦新 , 赵旭山 , 沈剑韵 . 添加Nb对Zr-4合金在500 ℃过热蒸汽中耐腐蚀性能的影响[J]. 金属学报, 2011 , 47(7) : 865 -871 . DOI: 10.3724/SP.J.1037.2011.00106

Abstract

The corrosion resistance of Zr-4+xNb alloys (x=0.1-0.3, mass fraction, %) was investigated in a superheated steam at 500 ℃ and 10.3 MPa by autoclave tests. The microstructure of the alloys and fracture surface morphology of the oxide film formed on the alloys were observed by TEM and SEM, respectively. Results show that no nodular corrosion appears on Zr-4+xNb alloys in 500 ℃/10.3 MPa superheated steam even for 500 h, which is related to the higher Nb concentration dissolved in α-Zr matrix. The Nb dissolved in α-Zr matrix can restrain the nucleation of nodular corrosion, thus improve the nodular corrosion resistance. The uniform corrosion resistance of Z-4+xNb alloys is lowered with the increase of Nb content, which is related to the decrease of the solid solution concentration of (Fe+Cr) in α-Zr matrix and the precipitation of the second phase particles of Zr(Fe, Cr, Nb)₂, and the two aspects will accelerate the microstructural evolution of the oxide film during corrosion process to promote the formation of pores and micro-cracks.

Key words： zirconium alloy; Nb; nodular corrosion; microstructure

参考文献

[1] Liu J Z. Nuclear Structural Materials. Beijing: Chemical Industry Press, 2007: 112

(刘建章. 核结构材料. 北京: 化学工业出版社, 2007: 112)

[2] Ogata K. In: Van Swam L F P, Eucken C M, eds., Zirconium in the Nuclear Industry: 8th International Symposium, ASTM STP 1023, San Diego, CA: ASTM International, 1988: 346

[3] Zhou B X, Li Q, Yao M Y, Xia S, Liu W Q, Chu Y L. Rare Met Mater Eng, 2007; 36: 1129

(周邦新, 李强, 姚美意, 夏爽, 刘文庆, 禇于良. 稀有金属材料与工程, 2007; 36: 1129)

[4] Zhou B X, Zhao W J, Miao Z, Huang D C, Jiang Y R. In: Zhou B X, Shi Y K, eds., Proc III–2 China Nuclear Materials Academic Conference in 1996, Beijing: Chemical Industry Press, 1997: 183

(周邦新, 赵文金, 苗志, 黄德诚, 蒋有荣著; 周邦新, 石永康主编, 96中国核材料研讨会论文集III-2,北京: 化学工业出版社, 1997: 183)

[5] Zhou B X, Yao M Y, Li Q, Xia S, Liu W Q, Chu Y L. Rare Met Mater Eng, 2007; 36: 1317

(周邦新, 姚美意, 李强, 夏爽, 刘文庆, 禇于良. 稀有金属材料与工程, 2007; 36: 1317)

[6] Yao M Y, Zhou B X, Li Q, Xia S, Liu W Q. Shanghai Met, 2008; 30: 1

(姚美意, 周邦新, 李强, 夏爽, 刘文庆. 上海金属, 2008; 30: 1)

[7] Zhou B X, Li Q, Yao M Y, Liu W Q. Nucl Power Eng, 2005; 26: 364

(周邦新, 李强, 姚美意, 刘文庆. 核动力工程, 2005; 26: 364)

[8] Toffolon–Masclet C, Brachet J C, Jago G. J Nucl Mater, 2002; 305: 224

[9] Yang W D. Reactor Materials Science. 2nd Ed., Beijing: Atomic Energy Press, 2006: 260

(杨文斗. 反应堆材料学. 第二版. 北京: 原子能出版社, 2006: 260)

[10] Zhou B X, Li Q, Yao M Y, Liu W Q, Chu Y L. In: Kammenzind B, Limb¨ack M, eds., Zirconium in the Nuclear Industry: 15th International Symposium, ASTM STP 1505, Sunriver, Oregon, USA: ASTM International, 2009: 360

[11] Anada H, Takeda K. In: Bradley E R, Sabol G P, eds., Zirconium in the Nuclear Industry: 11th International Symposium, ASTM STP 1295, Garmisch–Partenkirchen, Germany: ASTM International, 1996: 35

[12] Kim H G, Jeong Y H, Kim T H. J Nucl Mater, 2004; 326: 125

[13] Jeong Y H, Kim H G, Kim D J, Choi B K, Kim J H. J Nucl Mater, 2003; 323: 72

[14] Jeong Y H, Kim H G, Kim T H. J Nucl Mater, 2003; 317: 1

[15] Hao S M. Thermodynamics of Materials. Beijing: Chemical Industry Press, 2004: 333

(郝士明. 材料热力学. 北京: 化学工业出版社, 2004: 333)

[16] Charquet D. J Nucl Mater, 2001; 288: 237

[17] Li T F. High Temperature Oxidation and Thermal Corrosion of Metals. Beijing: Chemical Industry Press, 2003: 52

(李铁藩. 金属高温氧化和热腐蚀. 北京: 化学工业出版社, 2003: 52)

[18] Bangaru N V. J Nucl Mater, 1985; 131: 280

[19] Zhou B X, Peng J C, Yao M Y, Li Q, Xia S, Du C X, Xu G. J ASTM Int, 8(1), Paper ID JAI102951, www.astm.org.

[20] Zhou B X. In: Van Swam L F P, Eucken C M, eds., Zirconium in the Nuclear Industry: 8th International Symposium, ASTM STP 1023, San Diego, CA: ASTM International, 1988: 360

[21] Zhou B X, Yao M Y, Xia S, Liu W Q. J Shanghai Univ (Nat Sci Ed), 2008; 14: 441

(周邦新, 姚美意, 李强, 夏爽, 刘文庆. 上海大学学报(自然科学版), 2008; 14: 441)

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献