冷喷涂过程中能量变化及沉积行为的模拟研究
收稿日期: 2009-09-16
修回日期: 2010-03-18
网络出版日期: 2010-04-11
基金资助
国家自然科学基金项目50871019和50874009资助
NUMERICAL INVESTIGATION ON ENERGY BALANCE AND DEPOSITION BEHAVIOR DURING COLD SPRAYING
Received date: 2009-09-16
Revised date: 2010-03-18
Online published: 2010-04-11
Supported by
Supported by National Natural Science Foundation of China (Nos.50871019 and 50874009)
采用有限元分析软件ANSYS/LS-DYNA, 模拟了超音速冷喷涂过程中的颗粒碰撞过程, 研究了高速颗粒与基板碰撞时的能量转化、分配以及颗粒沉积过程, 分析了碰撞速度和材料特性对它们的影响. 结果表明, 碰撞过程中, 颗粒和基板材料均发生塑性变形, 使颗粒的动能被消耗, 且绝大部分动能转变为材料内能. 碰撞完成之后, 颗粒动能被分配到颗粒和基板材料中, 定义碰撞之后分配到颗粒中的与分配到基板中的能量之间的比值为能量分配系数K, K值过高或过低, 均表明颗粒和基板之间变形能力相差较大, 不利于颗粒与基板结合形成良好的涂层. 系统初始动能以及颗粒与基板材料性能对K值都有影响.
周香林 , 巫湘坤 , 王建国 , 张济山 . 冷喷涂过程中能量变化及沉积行为的模拟研究[J]. 金属学报, 2010 , 46(4) : 385 -389 . DOI: 10.3724/SP.J.1037.2009.00620
In this paper, the physical process during the impact of a cold spraying spherical particle with an infinite homogencous substrate was simulated using the finite element method (FEM). The effects of the impact vlocity, the particle and substrate materials on thimpact bebvior were invesigated. The results show that a significant amount of the initial total kinetic energy of the particle is dissipated due to the plastc deformation of particle and substrate, finally transforming to ther nternal energies. An energy partition coefficient K, defined as the ratio of the enegies distributed in the particle and substrate, has been introduced, which is closely related to the iniiatotakinetic enery of the particle and the deformability of the particle and substratduring the impactIt is fond that it is difficult to make a particle with hight K and a substrate with low K cohere strongly.
[1] Assadi H, Gartner F, Stoltenhoff T, Kreye H. Acta Mater, 2003; 51: 4379
[2] Grujicic M, Zhao C L, DeRosset W S, Helfritch D. Mater Des, 2004; 25: 681
[3] Li W Y, Zhang C, Guo X, Li C J, Liao H, Coddet C. Appl Surf Sci, 2007; 254: 517
[4] Wu J, Fang H, Yoon S, Kim H, Lee C. Scr Mater, 2006; 54: 665
[5] Wu J, Fang H, Yoon S, Lee C, Kim H J. Mater Trans, 2006; 47: 1723
[6] Bae G, Xiong Y, Kumar S, Kang K, Lee C. Acta Mater, 2008; 56: 4858
[7] Borchers C, Gartner F, Stoltenhoff T, Assadi H, Kreye H. J Appl Phys, 2003; 93: 10064
[8] Borchers C, Gartner F, Stoltenhoff T, Kreye H. Acta Mater, 2005; 53: 2991
[9] Zhou X L, Su X Y, Cui H, Wu X K, Zhang J S. Acta Metall Sin, 2008; 44: 1286
(周香林, 苏贤涌, 崔 华, 郭辉华, 巫湘坤, 张济山. 金属学报, 2008; 44: 1286)
[10] Livermore Software Technology Corporation. LS–DYNA version 90 Keywrd User’s manual, 2003
[11] Børvik T, Hopperstad O S, Berstad T, Langseth M. Eur J Mech, 2001; A20: 685
[12] Schmidt T, Gartner F, Assadi H, reye H. Acta Mater, 2006; 54: 729
[13] Grujicic M, Saylor J R, Beasley D E, DeRosset W S, Helfritch D. Appl Surf Sci, 2003; 219: 211
[14] Li W Y, Li C J, Wang Y Y, Yang G J. Acta Metall Sin, 2005; 41: 282
(李文亚, 李长久, 王豫跃, 杨冠军. 金属学报, 2005; 41: 282)
[15] Zhang H B, Zhang J B, Shan A D, Wu J S, Song H W. Acta Metall Sin, 2007; 43: 823
(章华兵, 张俊宝, 单爱党, 吴建生, 宋洪伟. 金属学报, 2007; 43: 823)
[16] Zahiri S H, Antonio C I, Jahedi M. J Mater Process Technol, 2009; 209: 922
[17] King P C, Zahiri S H, Jahedi M. Acta Mater, 2008; 56: 5617
[18] Yoon S, Lee C, Choi H, Jo H. Mater Sci Eng, 2006; A415: 45
/
| 〈 |
|
〉 |
