Please wait a minute...
金属学报  2008, Vol. 44 Issue (5): 609-614     
  论文 本期目录 | 过刊浏览 |
旋转磁场驱使强迫流对Sn-Bi合金微观结构的影响
陈钊;陈长乐;温晓莉;朱建华;高文帅
西北工业大学理学院
INFLUENCE OF ROTATING MAGNETIC FIELD DRIVEN FORCED CONVECTION ON THE MICROSTRUCTURES OF SN-BI ALLOYS
changle chen;xiaoli wen;ZHU Jian-Hua;
西北工业大学理学院
引用本文:

陈钊; 陈长乐; 温晓莉; 朱建华; 高文帅 . 旋转磁场驱使强迫流对Sn-Bi合金微观结构的影响[J]. 金属学报, 2008, 44(5): 609-614 .
, , , , . INFLUENCE OF ROTATING MAGNETIC FIELD DRIVEN FORCED CONVECTION ON THE MICROSTRUCTURES OF SN-BI ALLOYS[J]. Acta Metall Sin, 2008, 44(5): 609-614 .

全文: PDF(4386 KB)  
摘要: 以Sn--Bi合金为研究对象,分析了旋转磁场对凝固组织的影响. 发现旋转磁场能够消除宏观偏析、碎断枝晶和细化凝固组织, 加快了熔 体流动和固--液界面溶质的扩散速度, 使共晶组织的层片间距变小及形成区域差别. 同时,随着磁场旋转频率的增大, 合金的生长 形态经历了从枝晶→等轴晶→球状晶→枝晶的转变. 枝晶碎断、生长形态的改变以及共晶组织 层片间距变化的主要原因在于, 旋转磁场加快了熔体流动, 造成熔体中溶质场和温度场在分布 上趋于均匀化. 同时, 电导率的不同造成了初生相与液体的相对运动. 宏观偏析的消除是由于初生相同时受到重力、浮力和Lorentz力的合力作用的结果. 分析了旋转磁场对凝固组织改变的物理机制.
Abstract:In this paper we analyze the influence of rotating magnetic field driven forced convection on solidification microstructure, through investigating the solidification of Sn-Bi alloys in rotating magnetic field (RMF). We found that the RMF can eliminate macrosegregation,cause the fracture of dendrites and refinement of solidification structure, accelerate the velocity of melt and the diffuse of solute near the solid-liquid interface, decrease eutectic spacing, and cause the regional difference of eutectic microstructure. At the same time, there is a transition from dendrite-eqiaxed-orbed-dendrite growth with increasing the rotating frequency. The basic reasons of dendrite fracture and growth form transition and the eutectic spacing change consist in the enhancement of the melt velocity, the homogenization of temperature and solute fields, the relative motion between the primary phase and the melt caused by the electric conductivities difference. The reason of macrosegregation elimination is that the primary phase is affected by the combined effect of gravity, buoyancy and Lorentz force. Furthermore, the physical mechanism on the transition of solidification microstructure by rotating magnetic field is discussed.
Key words
收稿日期: 2007-09-26     
ZTFLH:  O0361  
[1]Zimmermann G,Weiss A,Mbaya Z.Mater Sci Eng,2005; A413-414:236
[2]Flemings M C.Metall Trans,1991;22B:269
[3]Riahi D N.J Cryst Growth,2000;216:501
[4]Holmes A M,Wang X,Ma N,Bliss D F,Iseler G W.Int J Heat Fluid Flow,2005;26:792
[5]Fan Z,Liu G,Hitchcock M.Mater Sci Eng,2005;A413- 414:229
[6]Ganapathysubramanian B,Zabaras N.J Cryst Growth, 2004;270:255
[7]Nikrityuk P A,Eckert K,Grundmann R.Int J Heat Fluid Flow,2006;49:1501
[8]Li X,Ren Z M,Wang H.Acta Metall Sin,2004;40:40 (李喜,任忠鸣,王晖.金属学报,2004;40:40)
[9]Langenberg F C,Pestel G,Honeycutt C R.TMS-AIME, 1961;221:993
[10]Johnston W C,Kotler G R,Tiller W A.TMS-AIME, 1963;227:890
[11]Johnston W C,Kotler G R,Tiller W A.TMS-AIME, 1965;233:1856
[12]Uhlmann D R,Seward T P,Chalmers B.TMS-AIME, 1966;236:527
[13]Vives C.J Cryst Growth,1986;76:170
[14]Dong J,Cui J Z,Ding W J.J Cryst Growth,2006;295: 179
[15]Willers B,Eckert S,Michel U,Haase I,Zouhar G.Mater Sci Eng,2005;A402:55
[16]Hu H Q.Solidification Principle of Metal.Beijing:China Machine Press,2000:185 (胡汉起.金属凝固原理.北京:机械工业出版社,2000:185)
No related articles found!