原子氢和白点对车轮钢力学性能的影响

金属学报

2006, Vol. 42

Issue (2): 153-157

论文

本期目录 | 过刊浏览

原子氢和白点对车轮钢力学性能的影响

任学冲;褚武扬;李金许;乔利杰;江波;陈刚;崔银会

北京科技大学材料科学与工程学院

Effects of Atomic Hydrogen and Flaking on Mechanical Properties of Wheel Steel

Xuechong Ren;

北京科技大学材料科学与工程学院

引用本文:

任学冲; 褚武扬; 李金许; 乔利杰; 江波; 陈刚 ; 崔银会 . 原子氢和白点对车轮钢力学性能的影响[J]. 金属学报, 2006, 42(2): 153-157 .
, , , , , , . Effects of Atomic Hydrogen and Flaking on Mechanical Properties of Wheel Steel[J]. Acta Metall Sin, 2006, 42(2): 153-157 .

全文: PDF(405 KB)

摘要: 车轮钢中白点形成的临界可扩散氢浓度为C0*=1.3×10-6(总氢浓度CT*=3.7×10-6). 当白点数量超过临界值(对应的可扩散氢浓度C0≥5.6×10-6), 则使强度和塑性急剧下降.但实际车轮中白点含量少(C0<3.9×10-6), 对材料的拉伸性能和断裂韧性没有影响. 原子氢对断裂韧性KIC没有影响; 但如慢拉伸,则使塑性下降. 如恒位移加载, 则原子氢能引起氢致滞后开裂, 其门槛应力强度因子KIH随C0升高而线性下降, 即KIH=57.8-3.9C0. 但白点对氢致滞后开裂没有影响.

关键词 ：车轮钢, 白点, 原子氢, 氢致滞后开裂

Abstract：The effects of atomic hydrogen and flaking on mechanical properties of a wheel steel have been investigated. The results show the critical diffusible hydrogen concentration for forming flaking is C*0=1.3×10-6（or total hydrogen concentration C*T=3.7×10-6）. If the amount of the flacking exceeds a critical value,e.g., C0≥5.6×10-6, it causes the plasticity and strength to decrease sharply. For a wheel, the amount of flaking is below the critical value because of C0<3.9×10-6,thus there is no effect of flaking on tensile properties and fracture toughness KIC. Atomic hydrogen doesn’t influence fracture toughness, but causes plasticity to decrease evidently during slow strain rate tension. Atomic hydrogen can also causes hydrogen –induced delayed cracking under constant deflection loading and the threshold stress intensity factor of hydrogen –induced delayed cracking, KIH, decreases linearly with increasing diffusible hydrogen concentration i.e., KIH＝57.8-3.9 C0. However there is no effect of the flaking on hydrogen-induced delayed cracking

Key words： wheel steel flaking atomic hydrogen hydrogen –induced delayed cracking

收稿日期: 2005-05-10

ZTFLH:

TB383

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	任学冲
	褚武扬
	李金许
	乔利杰
	江波
	陈刚
	崔银会
44.8K

链接本文:

https://www.ams.org.cn/CN/ 或 https://www.ams.org.cn/CN/Y2006/V42/I2/153

[1] Mclellan R R, Xu Z R. Scr Mater, 1997; 36: 1201
[2] Chu W Y. Hydrogen Damage and Hydrogen-Induced Delayed Fracture. Beijing: Metallurgical Industry Press, 1988: 146(褚武扬．氢损伤与滞后断裂．北京：冶金工业出版社，1988：148)
[3] Interrante C G. In: Pressouyre G M, eds., Current Solution to Problems in Steels. Metals Park, OH: ASM, 1982: 2
[4] Pressouyre G M. In: Pressouyre G M, eds., Current Solution to Problems in Steels. Metals Park, OH: ASM, 1982: 18
[5] Steiner J E. In: Pressouyre G M, eds., Current Solution to Problems in Steels. Metals Park, OH: ASM, 1982: 55
[6] Oriani R A, Hirth J P, Smialowski M. Hydrogen Degradation of Ferrous Alloys, Park Ridge, NJ: Noyes Pub., 1985: 1
[7] Fruehan R J. Iron Steel Maker, 1997; 24: 61
[8] Pollard M G. Proc Inst Mech Eng, 1999; 213F: 181
[9] Pan C, Su Y J, Chu W Y, Li Z B, Ling D T, Qiao L J. Corros Sci, 2002; 44: 1983
[10] Pan C, Chu W Y, Li Z B, Su Y J, Gao K W, Qiao L J. Mater Sci Eng, 2003; A351: 293
[11] National Standard of PRO, No.GB 12445.3—90, 1990 (中华人民共和国国家标准，GB12445．3—90，1990)
[12] Peng X, Su Y J, Gao K W Qiao L J, Chu W Y. Mater Lett, 2004; 58: 2073
[13] Ren X C, Shan G B. Chu W Y, Su Y J, Gao K W, Li J X, Qiao L J, Jiang B, Chen G, Cui Y H. Scr Mater, in press
[14] Zhang T, Chu W Y, Gao K W, Qiao L J. Mater Sci Eng, 2003; A347: 291

[1]	马跃潘涛江波崔银会苏航彭云. S含量对高速车轮钢断裂韧性影响的研究[J]. 金属学报, 2011, 47(8): 978-983.
[2]	单际国张婧郑世卿陈武柱任家烈. 压铸镁合金激光焊气孔形成原因的实验研究[J]. 金属学报, 2009, 45(8): 1006-1012.
[3]	任学冲; 武明; 褚武扬; 李金许; 乔利杰; 江波 ; 陈刚; 崔银会 . 连铸温度和低倍组织对轮箍钢氢致开裂的影响[J]. 金属学报, 2007, 43(2): 149-153 .
[4]	任学冲 . 原子氢和白点对车轮钢力学性能影响的进一步研究[J]. 金属学报, 2007, 42(1): 53-58 .
[5]	武明; 褚武扬; 李金许; 姜波; 陈刚; 崔银会 . 应力和夹杂对车轮钢中氢鼓泡的影响[J]. 金属学报, 2006, 42(8): 815-819 .
[6]	任学冲; 褚武扬; 李金许; 乔利杰 . 车轮钢中白点及其断口研究[J]. 金属学报, 2006, 42(3): 273-279 .
[7]	苏航; 季怀中; 张永权; 杨才福; 刘彤 . 高速列车车轮钢摩擦热致相变的计算机模拟[J]. 金属学报, 2004, 40(9): 909-914 .
[8]	何健英; 高克玮; 宿彦京; 乔利杰; 褚武扬 . TiNi形状记忆合金的氢致滞后断裂[J]. 金属学报, 2004, 40(4): 342-346 .
[9]	冼爱平;李培基;陈文绣;王仪康;陈仁义;梅东生. 攀钢重轨钢初轧坯堆冷的除氢效果[J]. 金属学报, 1993, 29(6): 33-37.
[10]	冼爱平;李培基;陈文绣;王仪康;陈仁义;梅东生. 攀钢重轨钢钢水中氢含量的变化[J]. 金属学报, 1993, 29(5): 16-22.
[11]	李培基;冼爱平;王仪康;陈仁义;梅东生. U71Mn重轨钢中的白点与含氢量[J]. 金属学报, 1992, 28(10): 25-28.

Viewed

Full text

Abstract

Cited

Shared

Discussed