Please wait a minute...
金属学报  1983, Vol. 19 Issue (2): 66-155    
  论文 本期目录 | 过刊浏览 |
珠光体组织疲劳裂纹扩展方式的观察
胡志忠;张平生
西安交通大学;西安交通大学
OBSERVATION ON FATIGUE CRACK PROPAGATION OF PEARLITIC STRUCTURE
HU Zhizhong; ZHANG Pingsheng (Xi'an Jiaotong University)
引用本文:

胡志忠;张平生. 珠光体组织疲劳裂纹扩展方式的观察[J]. 金属学报, 1983, 19(2): 66-155.
, . OBSERVATION ON FATIGUE CRACK PROPAGATION OF PEARLITIC STRUCTURE[J]. Acta Metall Sin, 1983, 19(2): 66-155.

全文: PDF(1978 KB)  
摘要: 珠光体组织的疲劳裂纹扩展方式可分为A,B,C三种类型。A型为裂纹同时横切多层铁素体片和渗碳体片而扩展;B型为裂纹逐层切割铁素体片和渗碳体片扩展;C型为裂纹只沿一层铁素体片或其界面扩展。A型出现的几率最大,B型的扩展阻力最大,C型的扩展阻力和出现的几率都最小。在疲劳裂纹扩展过程中它们的断口特征和比例都不同。在疲劳裂纹慢速扩展区,珠光体组织的疲劳裂纹扩展方式为A型加部分C型或B型。在疲劳裂纹稳态扩展区以A型和B型为主,可见明显的疲劳条纹,在快速扩展区以解理或韧窝为主。
Abstract:Observations were demonstrated of 3 different types of the fatigue crack propagation of pearlitic structure: type A——the crack intersects the multiple ferrites and cementites simultaneously; type B——the crack cuts the ferrite and cementite one after another and type C——the crack propagates only through ferrite plate or along interface of ferrite and cementite. The fractographic examination indicated that the 3 fracture types in the process of fatigue crack propagation appear as different feature and proportion. In the slow stage of the fatigue crack propagation, it is the type A with partly type C or B; in the stable stage, mainly type A and B as well as marked fatigue striation; while in fast speed stage, the cleavage or dimple with partly striation predominantly.
收稿日期: 1983-02-18     
1 Miller, L. E.; Smieh, G. C., J. Iron Steel Inst,, 228 (1970) , 998.
2 Gurland, J., Acta Metall., 20 (1972) , 735.
3 Rosenfield, A. R.; Haha, G. T.; Embury, J. D., Metall. Trans., 3 (1972) , 2797.
4 Porter, D. A.; Easterling, K. E.; Smith, G. D. W., Acta Metall., 26 (1978) , 1405.
5 徐永波;刘民治;朱桂秋;于章,金属学报,4(1980) ,485.
6 增日千利;田中紘一;西岛敏,日本机械学会论文集,№.403,昭55-3,247.
7 胡志忠;郭大展;张平生;金雪贞,机械工程学报,1(1982) ,25.
8 周惠久,西安交通大学科学研究论文选集,(1978-80) ,274.
9 郭大展;胡志忠;安仁杰;王静宜,西安交通大学学报,6(1981) ,51.|
No related articles found!