Please wait a minute...
金属学报  1983, Vol. 19 Issue (3): 93-100    
  论文 本期目录 | 过刊浏览 |
“显微畸变”和“嵌镶碎化”尺寸X射线分析——近似函数法及曲线集
孟庆恩;张自诚
冶金工业部钢铁研究总院;冶金工业部钢铁研究总院
X-RAY LINE PROFILE ANALYSIS FOR MICRO-DISTORTION AND MOSAIC SIZE——AN APPROXIMATELY FUNCTIONAL GRAPHIC METHOD AND ATLAS OF WORKING GRAPH
by MENU Qing'en; ZHANG Zichang (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)
引用本文:

孟庆恩;张自诚. “显微畸变”和“嵌镶碎化”尺寸X射线分析——近似函数法及曲线集[J]. 金属学报, 1983, 19(3): 93-100.
, . X-RAY LINE PROFILE ANALYSIS FOR MICRO-DISTORTION AND MOSAIC SIZE——AN APPROXIMATELY FUNCTIONAL GRAPHIC METHOD AND ATLAS OF WORKING GRAPH[J]. Acta Metall Sin, 1983, 19(3): 93-100.

全文: PDF(621 KB)  
摘要: 本文按近似函数图解法的处理步骤,介绍了每步的数据处理方法和公式;提供了分析中常用的整套曲线图。其中,几何宽化校正曲线全套应是九种,目前仅有前五种,本工作完成了后四种几何宽化校正曲线的制作,并介绍了制作原理和方法;同时根据钢铁研究中的需要,对马氏体基、奥氏体基以及镍基合金材料的各种可能被采用的X射线衍射线对,并考虑到实验室中常用的五种辐射,绘制了35种单波法m,n分离曲线。
Abstract:An approximately functional graphic method and formulae for X-ray line frofile analysis of micro-distortion and mosaic structure were developed and a complete set of geometric broadening correction curves graph for this purpose was prepared.Considering the X-ray diffraction line pairs mostly selected in working on martensite and austenite materials and Ni-base alloys, based on the 5 radiations widely used in the laboratories, 35 kinds of separating m, n curves were plotted.
收稿日期: 1983-03-18     
1 Rachinger, W. A., Instrum. J. Sci., 25 (1948) , 254.
2 Gazzara, C. P.; Stiglich, J. J. Jr.; Meyer, F. P.; Hansen, A. M., Advances in X-Ray Analysis, Vol. 12, Plenum Press, New York, 1969, p. 257.
3 #12
4 许守廉,X射线金属学实验指导书,机械工业出版社,1966.
5 徐安达;张孝文,清华大学学报,11(1964) ,№ 4,21.
6 Klug, H. P.; Alexander, L. E., X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., Wiley, New York, 1974, p. 618.
7 Hall, W. H., Proc. Phys. Soc., (London), 62A (1949) , 741.
8 Hall, W. H., J. Inst. Met, 75 (1949) , 1127.
9 #12
10 #1
No related articles found!