金属学报  1983, Vol. 19 Issue (5): 46-52

论文 本期目录 | 过刊浏览 |

Ag-Cu复合材料界面结构和强度的研究

王志兴;赖祖涵;刘国禄;魏海荣

东北工学院;东北工学院;东北工学院;东北工学院

ON THE INTERFACIAL STRUCTURE AND COHESION STRENGTH OF Ag-Cu COMPOSITE MATERIAL

WANG Zhixing; LAI Zuhan; LIU Guolu; WEI Hairong (Northeast Institute of Technology; Shenyang)

王志兴;赖祖涵;刘国禄;魏海荣. Ag-Cu复合材料界面结构和强度的研究[J]. 金属学报, 1983, 19(5): 46-52.
, , , . ON THE INTERFACIAL STRUCTURE AND COHESION STRENGTH OF Ag-Cu COMPOSITE MATERIAL[J]. Acta Metall Sin, 1983, 19(5): 46-52.

摘要 参考文献 相关文章 Metrics 全文: PDF(860 KB)   摘要: 热压Ag-Cu复合材料的界面层两侧各为含Ag的Cu基固溶体和含Cu的Ag基固溶体。界面两侧的结合是固溶体间的金属结合,界面强度比纯Ag的强度略高,而比纯Cu的强度低。 本文用X射线方法测定界面层晶格参数,用拉仲方法测定界面强度,并用Seah的准化学方法计算界面强度,与实验结果一致。研究结果表明,采用热压工艺制备Ag-Cu复合材料可以实现Ag-Cu的牢固结合。 Abstract：The interracial structure and cohesion strength of Ag-Cu bimetal composite material, obtained by hot-prossing, has been examined. X-ray diffraction patterns show that a binary solid solution containing Ag or Cu respectively is found on each side of the interface. The fracture surface of the tensile specimen made of such bimetal composite material lies on the Ag side of the interface, and the interface itself does not split. The Seach's quasi-chemical method, which is modified to evaluate the cohesion strength of the bimetal interface, gives the theoretical strength of 287.5 MN/m~2, which is higher than that of pure Ag. This is in agreement with the experimental observations. It seems to be concluded that the hotpressing is available to produce a stronger interracial cohesion of such bimetal composite material. 收稿日期: 1983-05-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王志兴 赖祖涵 刘国禄 魏海荣 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1983/V19/I5/46 1 冯端;王业宁;丘第荣编著,金属物理,上册,科学出版社,1964,p.146． 2 Doyama, M.; Koehler, J.S., Acta Metall., 24 (1976) , 874． 3 Seah, M.P., ibid., 28 (1980) , 955． 4 1979, p.40． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed