金属学报  1986, Vol. 22 Issue (1): 115-152

论文 本期目录 | 过刊浏览 |

Nb-V微合金钢在(γ+α)双相区的控轧及有关强化效应的估算

孙福玉;徐温崇

冶金工业部钢铁研究总院;冶金工业部钢铁研究总院

CALCULATION OF YIELD STRENGTH OF Nb-V MICROALLOY STEEL CONTROLLED-ROLLED INTO DUAL-PHASE γ+α

SUN Fuyu; XU Wenehong (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)

孙福玉;徐温崇. Nb-V微合金钢在(γ+α)双相区的控轧及有关强化效应的估算[J]. 金属学报, 1986, 22(1): 115-152.
, . CALCULATION OF YIELD STRENGTH OF Nb-V MICROALLOY STEEL CONTROLLED-ROLLED INTO DUAL-PHASE γ+α[J]. Acta Metall Sin, 1986, 22(1): 115-152.

摘要 参考文献 相关文章 Metrics 全文: PDF(2649 KB)   摘要: 利用小型试验轧机,对Nb-V微合金钢进行了(γ+α)双相区控轧试验。研究了终轧温度对钢的显微组织和力学性能的影响。定量估算了钢中的固溶强化σ_s,析出强化σ_p,位错强化σ_d,亚晶强化ck_s l~(-1/2)和晶粒细化的强化效应k_y d~(-1/2)。建立了一个新的有关低碳微合金化控轧钢的屈服强度关系式: σ_y=σ_i+σ_s+[σ_p~2+σ_d~2+(ck_s l~(-1/2))~2]~(1/2)+k_y d~(-1/2)用该式计算的σ_y值与实验结果符合得相当好。 Abstract：The controlled roiling experiments into the dual-phase γ+a region of the Nb-V microalloy steel have been carried out using a pilot roiling mill. The effect of finishing roiling temperature on the microstructure and mechanical properties of the steel was examined. The yield strength components containing the solid solution strengthening, σ_s, precipitation strengthening, σ_p, dislocation strengthening, σ_d, subgrain strengthening, ck_s l~(-1/2) and grain strengthening, k_yd~(-1/2), were estimated so that a new expression is found as:σ_y=σ_i+σ_s+[σ_p~2+σ_d~2+(ck_s l~(-1/2))~2]~(1/2)+k_yd~(-1/2)The σ_y calculated is in quite agreement with the experimental results. 收稿日期: 1986-01-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 孙福玉 徐温崇 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1986/V22/I1/115 1 徐温崇;孙福玉,金属学报,19 (1983) ,A483． 2 马翔,金属学报,21(1985) ,B222． 3 成田贵一;小山伸二;铁鋼,52 (1966) ;788． 4 Irvine, K.J.; Pickering, F.B.; Gladman, T., J.Iron Steel Inst., 205 (1967) , 161． 5 Tanaka, T.; Tabata, N.; Hatamura, T.; Shiga, C., Micro Alloying 75． Proc. of an International Symposium on High-Strength Low-alloy Steels, Wash., 1975． Sponsored by Union Carbide Corporation Metal Division, etc, New York, Union Carbide Corporation, 1977, p. 107-118． 6 Baker, T, N.; Hot Working And Forming Processes, Ed.Sellars, C.M.; Davies, G. J., The Metals Society, London, 1979, p. 32． 7 Hornbogen, E., Strength of Metals and Alloy, Vol. 2, Proc. of the 5th Int. Conf. on Strength of Metals and Alloys. Aachen, W.Germany, 1979, Eds. Heasen, P.;Gerold, V.; Kostorz. G., p. 1661-1680． 8 Kocks, U.F., Ibid., Vol. 3． 1979, p. 1661-1680． 9 Picketing, F.B.; Gladman, T., Metallurgical developments in carbon steels, Held by the Carbon Steels Committee of the British Iron and Steel Research Association and the Iron and Steel Institute, Harrogate, May 15-16 1963, p. 10． 10 Li, J.C,M., J.Appl. Phys. 33 (1962) , 2958． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed