Please wait a minute...
金属学报  1989, Vol. 25 Issue (2): 10-14    
  论文 本期目录 | 过刊浏览 |
共析Al-Zn合金非平衡扩散型相变内耗和模量特征
朱贤方;张立德
中国科学院固体物理研究所;助理研究员;合肥市;中国科学院固体物理研究所
CHARACTERISTICS OF INTERNAL FRICTION AND MODULUS ASSOCIATED WITH NON-EQUILIBRIUM DIFFUSION-TYPE PHASE TRANSFORMATION IN EUTECTOID Al-Zn ALLOY
ZHU Xianfang;ZHANG Lide Institute of Solid State Physics; Academia Sinica; Hefei
引用本文:

朱贤方;张立德. 共析Al-Zn合金非平衡扩散型相变内耗和模量特征[J]. 金属学报, 1989, 25(2): 10-14.
, . CHARACTERISTICS OF INTERNAL FRICTION AND MODULUS ASSOCIATED WITH NON-EQUILIBRIUM DIFFUSION-TYPE PHASE TRANSFORMATION IN EUTECTOID Al-Zn ALLOY[J]. Acta Metall Sin, 1989, 25(2): 10-14.

全文: PDF(446 KB)  
摘要: 研究了淬火Al-Zn共析合金中非平衡Spinodal预相变和后继的不连续转变低频内耗特征和模量效应。在非平衡Spinodal预相变中,观察到存在着与大幅度长波长的静态浓度波相联系的Spinodal失稳并没有引起局部模量软化效应。Spinodal预转变共格性的出现与消失和不连续转变中相界面面积的最大值,引起各自相应的时效内耗峰,但与峰相应的模量软化效应并未发生。
关键词 Spinodal预相变软模效应不连续转变内耗    
Abstract:The characteristics of the low freqency internal friction and moduluseffect associated with the non-equilibrium spinodal pretransformation and the follow-ing discontinuous transformation was investigated in an as-quenched eutectoid Al-Zn alloy. It was observed that the loss of the stability in the Iattice, which corre-sponded to the large-amplitude long-wavelength static concentration wave in thenon-equilibrium spinodal pretransformation, did not induce any effect of localizedsoft modulus. Although there are two aging internal friction peaks in phase transfor-mation which correspond to the appearance and disappearance of the coherency andthe maximum of the interface area in the discontinuous transformation, respectively,the effect of localized soft modulus did not take place yet.
Key wordsspinodal pretransformation    soft Modulus    discontinuous transformation    internal friction
收稿日期: 1989-02-18     
1 朱贤方,文亦汀,谢存毅.第二届全国马氏体相变会议文集,(第二册),大连工学院,中国金属学会,1987
2 Defoutaine D. Metall Trans, 1981; 12A: 559
3 Clapp P C. Metall Trans, 1981; 12A: 589
4 Ju C P, Fournelle R A. Acta Metall, 1985; 33: 71
5 Zhu Y H, Murphy S. Chin J Met Sci Technol, 1986; 2: 105
6 Shoeck G. Phys Status Solidi, 1969; 32: 651
7 刘国勋主编,金属学原理,冶金工业出版社,1980:391
8 冯端.金属物理学,(第一卷),科学出版社,1987:469
9 Clapp P C. Phys Status Solidi, (b) 1973; 57: 561
10 杨照金,邹一峰,张志方,王业宁.金属学报.1982;18:21
11 加藤光治,河合栄一郎,六碕贤亮,宫川松男.日本金属学会志,1974;38:539
[1] 李维娟, 张恒毅, 付豪, 张建平, 戚翔宇. 低碳钢烘烤硬化机制的内耗研究[J]. 金属学报, 2015, 51(4): 385-392.
[2] 王华 史文 何燕霖 符仁钰 李麟. Mn和P在超低碳烘烤硬化钢中的分布形态及对其拉伸行为的影响研究[J]. 金属学报, 2011, 47(3): 263-268.
[3] 吴杰 崔洪芝 迟静 姚树玉 韩福生. B2 Fe-Al合金有序化过程中的内耗峰[J]. 金属学报, 2009, 45(4): 396-399.
[4] 张建; 李秀艳; 赵明久; 戎利建 . 晶界相对Fe-Ni-Cr奥氏体合金氢脆的影响[J]. 金属学报, 2008, 44(9): 1095-1098 .
[5] 孙蔚; 韩福生; 吴杰 . Fe-Al合金中与Al反位置原子弛豫有关的内耗峰[J]. 金属学报, 2007, 43(3): 311-314 .
[6] 汪宏斌; 王晓宇; 张骥华; 徐祖耀 . 纳米晶Fe-25%Ni合金块材的内耗研究[J]. 金属学报, 2004, 40(5): 523-526 .
[7] 戢景文; 于宁; 孙振岩; 任建新; 王云盛 . 稀土对BNb钢轨踏面区内耗谱的影响[J]. 金属学报, 2003, 39(11): 1219-1222 .
[8] 余黎明; 李晶晶; 马岳 . 热老化对ZN-1阻尼材料内耗特性的影响[J]. 金属学报, 2003, 39(11): 1205-1208 .
[9] L.B.Magalas; 方前锋 . 低频机械谱术测量薄膜切变模量及微量油膜探测[J]. 金属学报, 2003, 39(11): 1228-1232 .
[10] 李健; M.Wuttig . 用薄膜内耗仪测定薄膜应力[J]. 金属学报, 2003, 39(11): 1225-1227 .
[11] 戴玉蓉; 包鹏; 沈惠敏; 朱劲松; 王业宁 . PZT陶瓷材料低温相变的内耗测量[J]. 金属学报, 2003, 39(11): 1167-1169 .
[12] 马永青; 宋文海; 戴建明; 张瑞丽; 杨杰; 杜家驹; 孙玉平 . 钙钛矿结构锰氧化物La0.67Ca0.33MnO3的内耗研究[J]. 金属学报, 2003, 39(11): 1173-.
[13] 李合琴; 陈志宝 . 低掺杂La0.82Sr0.18MnO3巨磁电阻块材的低频内耗[J]. 金属学报, 2003, 39(11): 1170-1172 .
[14] 张进修; 龚康 . 结晶状态对铜内耗频率谱的影响[J]. 金属学报, 2003, 39(11): 1212-1214 .
[15] 应学农; 汪洋; 黄以能; 王业宁 . 过掺杂区Y123体系的低温内耗研究[J]. 金属学报, 2003, 39(11): 1189-1192 .