Please wait a minute...
金属学报  1992, Vol. 28 Issue (12): 23-28    
  论文 本期目录 | 过刊浏览 |
β斑点对Ti-10V-2Fe-3Al合金性能的影响
周义刚;俞汉清;曾卫东;唐加林
西北工业大学材料科学与工程系;教授;西安710072;西北工业大学;西北工业大学;中国南方航空动力机械公司
EFFECT OF β-FLECK ON MECHANICAL PROPERTIES OF Ti-10V-2Fe-3Al ALLOY
ZHOU Yigang; YU Hanqing; ZENG Weidong (Northwestern Polytechnical University; Xi'an)TANG Jialing (Chinese Aviation South Power Machine Company; Zhuzhou)
引用本文:

周义刚;俞汉清;曾卫东;唐加林. β斑点对Ti-10V-2Fe-3Al合金性能的影响[J]. 金属学报, 1992, 28(12): 23-28.
, , , . EFFECT OF β-FLECK ON MECHANICAL PROPERTIES OF Ti-10V-2Fe-3Al ALLOY[J]. Acta Metall Sin, 1992, 28(12): 23-28.

全文: PDF(1070 KB)  
摘要: 

研究了β斑点对Ti-10V-2Fe-3Al合金的室温拉伸性能和低周疲劳性能的影响,发现在β斑点区内,裂纹沿原始β晶界扩展形成沿晶脆性断裂,在交变应力作用下,β斑点往往成为疲劳源点,在高应变下,β斑区内的原始β晶界和晶界α处萌生裂纹并导致早期断裂。

关键词 Ti—10V—2Fe—3Al合金β斑点拉伸塑性低周疲劳寿命    
Abstract

Effect of β-fleck on properties of tensile elongation and low cycle fatigue life at room temperature for Ti-10V-2Fe-3Al alloy has been investigated. The cracks along initial β-grain boundaries in the β-fleck region may propagate to form intergranular brittle fracture. Under alternating load, the β-fleck often becomes a fatigue origin. While under higher strain, the cracks initiate and propagate to fracture early at the original β-grain boundaries in β-fleck region and at α-grain boundaries.

Key wordsTi-10V-2Fe-3Al alloy    β-fleck    tensile property    low cycle fatigue life
    

1 Froes F H, Bomberger H B. J Met, 1985; 37(7) :28
2 Bomberger H B, Froes F H. J Met, 1984; 36(12) :39
3 周义刚,俞汉清,张恒毕,徐好义.西北工业大学学报,1990;8(4) :425
4 Sparks R B, Long J R. Technical Reprit, AFML-TR-37-301, 1974
5 Funkenlusch A W, Coffio L F. Metall Trans, 1978; 9A:1159
6 Terlinde G T, Duerig T W, Williams J C. Metall Trans, 1983; 14A:2101
7 Craef M. Metall, 1978; 32:563
8 Feltner C E, Beardmor P. ASTM STP 467, 1969:77

[1] 张莹 张义文 张娜 刘明东 刘建涛. 粉末冶金高温合金FGH97的低周疲劳断裂特征[J]. 金属学报, 2010, 46(4): 444-450.
[2] 梁益龙;雷旻;钟蜀辉;江山. 板条马氏体钢的断裂韧性与缺口韧性、拉伸塑性的关系[J]. 金属学报, 1998, 34(9): 950-958.