金属学报  1995, Vol. 31 Issue (22): 435-439

论文 本期目录 | 过刊浏览 |

多孔喷吹钢包内流动和混合过程的数学物理模拟

朱苗勇;井本健夫;肖泽强

东北大学;新日本钢铁公司;东北大学钢铁冶金系

MATHEMATICAL AND PHYSICAL MODELING OF FLOW AND MIXING IN LADLES STIRRED BY ARGON THROUGH MULTI-TUYERE

ZHU Miaoyong; (Department of Ferrous Metallurgy; Northeastern University;Shenyang 110006) INOMOTO Takeo; XIAO Zeqiang(Northeastern University; Shenyang 110006)(Nippon Steel Corporation; Futtsu; Japan)

朱苗勇;井本健夫;肖泽强. 多孔喷吹钢包内流动和混合过程的数学物理模拟[J]. 金属学报, 1995, 31(22): 435-439.
, , . MATHEMATICAL AND PHYSICAL MODELING OF FLOW AND MIXING IN LADLES STIRRED BY ARGON THROUGH MULTI-TUYERE[J]. Acta Metall Sin, 1995, 31(22): 435-439.

摘要 参考文献 相关文章 Metrics 全文: PDF(411 KB)   摘要: 通过对多孔喷吹钢包内流动和混合过程的数学模拟和物理模拟，考察了六种不同喷吹方式下钢包内的流动及混合特征，提出了能获得以软吹且混合快为目的的喷嘴布置及考虑喷嘴个数影响的混合时间关系式。数学模拟与物理模拟的结果相一致． 关键词 ： 钢包精炼,  多孔喷吹,  流动混合,  数学物理模拟     Abstract：Mathematical modeling and physical modeling have been conducted to investigate the characteristics of fluid flow and mixing in argon-stirred ladles with six different types of tuyere arrangement. An optimum arrangement of tuyeres considering the various purposes of refining and an empirical correlation for mixing time concerning the number of tuyeres are proposed. The results of mathematical modeling are in good agreement with those of physical modeling. Key words： ladle refining    blowing with multi-tuyere    flow    mixing    mathematical modeling    physical modeling      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 朱苗勇 井本健夫 肖泽强 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1995/V31/I22/435 1JooS,GuthrieRIL,KamalG．SteelmakingProc,1989;72:5172HsiaoTC,LehnerT,KjellbergB．ScandJMetall,1980;9:1053JonesWP,LaunderBE,IntJHeatMassTransfer,1972;15:3014PatankarSV．NumericalHeatTransferandFluidFlow,HemisperePubCo,19805朱苗勇,泽田郁夫,肖泽强．金属学报,1995;31:B3466NakanishiK,SaitoK,NozakiT．SteelmakingProc,1982;65:1016 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed