均质化温度对3003铝合金微观组织和力学性能的影响规律
Effect of Homogenization Temperature on the Microstructure and Mechanical Properties of 3003 Aluminum Alloys
均质化温度对3003铝合金微观组织和力学性能的影响规律 |
| 刘泽田, 路伟昭, 徐新宇, 刘旭, 张少游, 王慧远 |
|
Effect of Homogenization Temperature on the Microstructure and Mechanical Properties of 3003 Aluminum Alloys |
| LIU Zetian, LU Weizhao, XU Xinyu, LIU Xu, ZHANG Shaoyou, WANG Huiyuan |
| 图8 3003铝合金的凝固路径(Scheil模型)，计算得到的溶质分配系数和fcc相中溶质元素质量分数随固相分数的变化情况，铸态试样微观组织形貌，及实际凝固组织晶内溶质元素的质量分数分布规律 |
| Fig.8 Solidification path of 3003 alloys in Scheil approximation (L—liquid) (a); evolution of solute partition coefficients (ki, i = Mn, Cu, Si, and Fe, the same below) (b) and solute concentrations (wi ) in fcc phases (c) with solid fraction calculated by Pandat software; the casting microstructure (d) and EDS results of Mn (e), Cu (f), Si (g), and Fe (h) along the line in Fig.8d |
|
|