[an error occurred while processing this directive]
金属材料晶界结构的拓扑性质与表征
朱思瑛(), 易敏, 郭万林()
Topological Properties and Characteristics of Grain Boundary Structure in Metallic Materials
ZHU Siying(), YI Min, GUO Wanlin()

图5. 纯金属Ti中Σ13 [0001]倾斜晶界处Fe“笼状”结构的三维(3D)原子构型示意图和HAADF-STEM像,及对称Σ13 [0001] {7¯520}倾斜晶界原子结构的HAADF-STEM像[2]

Fig.5. Schematics and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images of atomic configuration at tilt GBs in pure Ti[2]
(a) three-dimensional (3D) atomic configuration and HAADF-STEM image of Fe “cages” at the Σ13 [0001] tilt GB (The GB plane is perpendicular to the figure, with basal planes of the adjoining crystals marked as A and B. Fe atoms (red spheres) periodically segregate between successive basal planes, forming icosahedral cage-like units along the [0001] tilt axis. These “cages” are surrounded by Ti (grey and blue spheres) pentagonal rings lying in the basal planes. The rotated Ti pentagons (blue and yellow dotted lines) reproduce the projected 10-atom ring along [0001])
(b1, b2) HAADF-STEM images showing atomic structure of symmetric Σ13 [0001] {7¯520} tilt GBs in pure Ti
(b1) the initial GB without detectable level of segregation (The periodic arrangement of structural units designated as A, B, and C)
(b2) periodic Fe segregation to a GB resulting in the formation of novel structures at the GB core resembling “cages” (The cage centre (red area) is rich in Fe, the shell of the cage (blue area) is rich in Ti, this result is also verified by atomic scale spectroscopy)