3D打印医用钛合金多孔材料力学性能研究进展
Research Progress on the Mechanical Properties of the Biomedical Titanium Alloy Porous Structures Fabricated by 3D Printing Technique
3D打印医用钛合金多孔材料力学性能研究进展 |
| 李述军, 侯文韬, 郝玉琳, 杨锐 |
|
Research Progress on the Mechanical Properties of the Biomedical Titanium Alloy Porous Structures Fabricated by 3D Printing Technique |
| LI Shujun, HOU Wentao, HAO Yulin, YANG Rui |
| 图5 梯度Ti-6Al-4V多孔材料循环变形过程中的应变累积曲线和梯度多孔材料循环变形停止在图5a中不同阶段的X射线三维成像照片[ |
| Fig.5 Typical variation of accumulated strain with cycle number of the Ti-6Al-4V graded mesh (Insets schematically show the crack initiation and propagation in different constituents during cyclic deformation) (a) and X-ray tomography (XRT) of the graded meshes after being stopped at different stages of cycling shown in Fig.5a (b)[ |
|
|