形变及退火工艺对Fe47Mn30Co10Cr10B3双相高熵合金组织演变的影响
刘怡1, 涂坚1,2(
), 杨威华1, 尹瑞森3, 谭力1, 黄灿1, 周志明1,2
), 杨威华1, 尹瑞森3, 谭力1, 黄灿1, 周志明1,2
Effect of Deformation and Annealing Treatment on Microstructure Evolution of Fe47Mn30Co10Cr10B3 Dual-Phase High-Entropy Alloy
LIU Yi1, TU Jian1,2(), YANG Weihua1, YIN Ruisen3, TAN Li1, HUANG Can1, ZHOU Zhiming1,2
), YANG Weihua1, YIN Ruisen3, TAN Li1, HUANG Can1, ZHOU Zhiming1,2
图7. 形变态Fe47Mn30Co10Cr10B3和Fe50Mn30Co10Cr10 HEA样品经不同退火处理后的EBSD图
Color online
(a1~a3) deformed 10% Fe47Mn30Co10Cr10B3 HEA samples followed by annealing at 1000 ℃ for 5 min(b1~d3) deformed 50% Fe47Mn30Co10Cr10B3 HEA samples followed by annealing at 1000 ℃ for 1 min (b1~b3), 5 min(c1~c3) and 30 min (d1~d3) (e1~e3) deformed 50% Fe50Mn30Co10Cr10 HEA samples followed by annealing at 1000 ℃ for 5 min
Fig.7. IPF maps (a1~e1), phase maps (a2~e2) and grain boundary maps (a3~e3) of Fe47Mn30Co10Cr10B3 (a1~d3) and Fe50Mn30Co10Cr10 (e1~e3) HEA after different annealing treatments
