电弧增减材复合制造精度控制研究进展
卢振洋1,2,田宏宇1,3,陈树君1(),李方1
Review on Precision Control Technologies of Additive Manufacturing Hybrid Subtractive Process
LU Zhenyang1,2,TIAN Hongyu1,3,CHEN Shujun1(),LI Fang1

图7. 拐角和圆弧处成形形貌误差[19]

Fig.7. Forming morphology errors at corners and arcs[19](a) plane shapes with sharp angle of about 20°, 15° and 10° respectively deposited using WAAM(b) curve shapes with curvature radii of about 20 mm, 10 mm and 5 mm respectively deposited using WAAM