高Fe、Cr含量多相Ni3Al基高温合金组织与性能研究进展
吴静,刘永长(
),李冲,伍宇婷,夏兴川,李会军
),李冲,伍宇婷,夏兴川,李会军
Recent Progress of Microstructure Evolution and Performance of Multiphase Ni3Al-Based Intermetallic Alloy with High Fe and Cr Contents
WU Jing,LIU Yongchang(),LI Chong,WU Yuting,XIA Xingchuan,LI Huijun
),LI Chong,WU Yuting,XIA Xingchuan,LI Huijun
图5. 经1200 ℃、10 h固溶处理后，不同冷却方式对枝晶间β相及内部析出相演变的影响[
Fig.5. Low (a~c) and high (d~f) magnified SEM morphologies of the interdendritic β phase in alloy subjected to 1200?℃, 10?h solution treatment and cooled at water cooling (138?℃/s) (a, d), air cooling (72?℃/s) (b, e) and furnace cooling (0.05?℃/s) (c, f), revealing the effects of cooling rate on the evolution of the interdendritic β-matrix and interior precipitates (SFs—stacking faults) [
