Sn对锆合金在280 ℃ LiOH水溶液中初期腐蚀行为的影响 |
||||||||||||||||||||||
| 姚美意,林雨晨,侯可可,梁雪,胡鹏飞,张金龙,周邦新 | ||||||||||||||||||||||
|
Effect of Sn on Initial Corrosion Behavior of Zirconium Alloy in 280 ℃ LiOH Aqueous Solution |
||||||||||||||||||||||
| Meiyi YAO,Yuchen LIN,Keke HOU,Xue LIANG,Pengfei HU,Jinlong ZHANG,Bangxin ZHOU | ||||||||||||||||||||||
| 表3 280 ℃、6.3 MPa、0.01 mol/L LiOH 水溶液中短时腐蚀的TEM薄样品横截面薄区氧化过程、晶格畸变层占比、m-ZrO2占比和氧化层厚度的结果(其中氧化层厚度和各层比数据来自厚度300 nm处的结果) | ||||||||||||||||||||||
| Table 3 TEM thin sample cross-section oxidation process, proportion of lattice distortion layer, proportion of m-ZrO2 and thickness of oxide layer in short-time corrosion of 280 ℃, 6.3 MPa and 0.01 mol/L LiOH aqueous solution, where the oxide layer thickness and proportion of each layer are taken from the sample thickness of 300 nm | ||||||||||||||||||||||
|
||||||||||||||||||||||