丝材+电弧增材制造钛/铝异种金属反应层的研究
田银宝,申俊琦(
),胡绳荪,勾健
),胡绳荪,勾健
Study of the Reaction Layer of Ti and Al Dissimilar Alloys by Wire and Arc Additive Manufacturing
TIAN Yinbao,SHEN Junqi (),HU Shengsun,GOU Jian
),HU Shengsun,GOU Jian
图4. 丝材+电弧增材制造(WAAM)构件微观组织
Fig.4. OM image of Ti/Al wire and arc additive manufacturing (WAAM) component (a), SEM images of areas II (b), III (c) and IV (d) in Fig.4a
