|
|
分层厚度对选区激光熔化成形Ti-5Al-2.5Sn合金组织与性能的影响规律 |
高飘, 魏恺文, 喻寒琛, 杨晶晶, 王泽敏(), 曾晓雁 |
华中科技大学武汉光电国家实验室 武汉 430074 |
|
Influence of Layer Thickness on Microstructure and Mechanical Properties of Selective Laser Melted Ti-5Al-2.5Sn Alloy |
Piao GAO, Kaiwen WEI, Hanchen YU, Jingjing YANG, Zemin WANG(), Xiaoyan ZENG |
Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, China |
引用本文:
高飘, 魏恺文, 喻寒琛, 杨晶晶, 王泽敏, 曾晓雁. 分层厚度对选区激光熔化成形Ti-5Al-2.5Sn合金组织与性能的影响规律[J]. 金属学报, 2018, 54(7): 999-1009.
Piao GAO,
Kaiwen WEI,
Hanchen YU,
Jingjing YANG,
Zemin WANG,
Xiaoyan ZENG.
Influence of Layer Thickness on Microstructure and Mechanical Properties of Selective Laser Melted Ti-5Al-2.5Sn Alloy[J]. Acta Metall Sin, 2018, 54(7): 999-1009.
[1] | Li Y K, Quan C Y, Lu S P, et al.Study on shape correction of the thin plate of TA15 titanium alloy by post weld heat treatment[J]. Acta Metall. Sin., 2016, 52: 281(李永奎, 权纯逸, 陆善平等. TA15钛合金薄壁焊接件热处理校形研究[J]. 金属学报, 2016, 52: 281) | [2] | Zhang X Y, Zhao Y Q, Bai C G.Titanium Alloys and Applications [M]. Beijing: Chemical Industry Press, 2004: 82(张喜燕, 赵永庆, 白晨光. 钛合金及应用 [M]. 北京: 化学工业出版社, 2004: 82) | [3] | Donachie M J.Titanium: A Technical Guide[M]. 2nd Ed., Materials Park, OH: ASM International, 2000: 11 | [4] | Huang W P, Yu H C, Yin J, et al.Microstructure and mechanical properties of K4202 cast nickel base superalloy fabricated by selective laser melting[J]. Acta Metall. Sin., 2016, 52: 1089(黄文普, 喻寒琛, 殷杰等. 激光选区熔化成形K4202镍基铸造高温合金的组织和性能[J]. 金属学报, 2016, 52: 1089) | [5] | Zhang W Q, Zhu H H, Hu Z H, et al.Study on the selective laser melting of AlSi10Mg[J]. Acta Metall. Sin., 2017, 53: 918(张文奇, 朱海红, 胡志恒等. AlSi10Mg的激光选区熔化成形研究[J]. 金属学报, 2017: 53: 918) | [6] | Wang Z M, Guan K, Gao M, et al.The microstructure and mechanical properties of deposited-IN718 by selective laser melting[J]. J. Alloys Compd., 2012, 513: 518 | [7] | Ma M M, Wang Z M, Wang D Z, et al.Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L stainless steel[J]. Opt. Laser. Technol., 2013, 45: 209 | [8] | Yu H C, Yang J J, Yin J, et al.Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel[J]. Mater. Sci. Eng., 2017, A695: 92 | [9] | Yablokova G, Speirs M, Van Humbeeck J, et al.Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants[J]. Powder Technol., 2015, 283: 199 | [10] | Zhou Y, Wen S F, Song B, et al.A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance[J]. Mater. Des., 2016, 89: 1199 | [11] | Wei K W, Wang Z M, Zeng X Y.Preliminary investigation on selective laser melting of Ti-5Al-2.5Sn α-Ti alloy: From single tracks to bulk 3D components[J]. J. Mater. Process. Technol., 2017, 244: 73 | [12] | Ma M M, Wang Z M, Zeng X Y, et al.Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel[J]. J. Mater. Process. Technol., 2015, 215: 142 | [13] | Choi J, Chang Y.Characteristics of laser aided direct metal/material deposition process for tool steel[J]. Int. J. Mach. Tool. Man., 2005, 45: 597 | [14] | Shim D S, Baek G Y, Seo J S, et al.Effect of layer thickness setting on deposition characteristics in direct energy deposition (DED) process[J]. Opt. Laser. Technol., 2016, 86: 69 | [15] | Panda B N, Garg A, Shankhwar K.Empirical investigation of environmental characteristic of 3-D additive manufacturing process based on slice thickness and part orientation[J]. Measurement, 2016, 86: 293 | [16] | Aboulkhair N T, Maskery I, Tuck C, et al.On the formation of AlSi10Mg single track and layers in selective laser melting: Microstructure and nano-mechanical properties[J]. J. Mater. Process. Technol., 2016, 230: 88 | [17] | Chen G X, Zeng X Y.Design and development of equipment of selective laser melting rapid prototyping[J]. Mech. Design. Manuf., 2010, (8): 15(陈光霞, 曾晓雁. SLM激光快速成型设备的设计与开发[J]. 机械设计与制造, 2010, (8): 15) | [18] | Chen G X, Zeng X Y.Design on SLM powder coating device[J]. Manuf. Technol. Mach. Tool, 2012, (3): 57(陈光霞, 曾晓雁. 选择性激光熔化激光快速成型铺粉装置设计[J]. 设计与研究, 2012, (3): 57) | [19] | Zou W Z, Guo X G, Xie X Y, et al.Titanium Handbook [M]. Beijing: Chemical Industry Press, 2012: 338 | [20] | Wei K W, Wang Z M, Zeng X Y.Element loss of AZ91D magnesium alloy during selective laser melting process[J]. Acta Metall. Sin., 2016, 52: 184(魏恺文, 王泽敏, 曾晓雁. AZ91D镁合金在激光选区熔化成形中的元素烧损[J]. 金属学报, 2016, 52: 184) | [21] | Krutha J P, Froyen L, Vaerenbergh J V, et al.Selective laser melting of iron-based powder[J]. J. Mater. Process. Technol., 2004, 149: 616 | [22] | King W E, Barth H D, Castillo V M, et al.Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing[J]. J. Mater. Process. Technol., 2014, 214: 2915 | [23] | Kamath C, El-Dasher B, Gallegos G F, et al.Density of additively-manufactured, 316LSS parts using laser powder-bed fusion at powers up to 400 W[J]. Int. J. Adv. Manuf. Technol., 2014, 74: 65 | [24] | Collings E W, Welsch G.Materials Properties Handbook: Titanium Alloys[M]. Materials Park, OH: ASM International, 1994: 289 | [25] | Alphons A A.Microstructure, texture and mechanical property evolution during additive manufacturing of Ti6Al4V alloy for aerospace applications [D]. Manchester, UK: The University of Manchester, 2012: 61 | [26] | Ahmed T, Rack H J.Phase transformations during cooling in α+β titanium alloys[J]. Mater. Sci. Eng., 1998, A243: 206 | [27] | Hofmeister W, Griffith M.Solidification in direct metal deposition by LENS processing[J]. JOM., 2001, 53(9): 30 | [28] | Zhang B C, Liao H L, Christian C.Microstructure evolution and density behavior of CP-Ti parts elaborated by self-developed vacuum selective laser melting system[J]. Appl. Surf. Sci., 2013, 279: 310 | [29] | Gu D D, Christian Y H, Wilhelm M, et al.Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Mater., 2012, 60: 3849 | [30] | Yan W Q, Dai L, Gui C B.In situ synthesis and hardness of TiC/Ti5Si3 composites on Ti-5A1-2.5Sn substrates by gas tungsten arc welding[J]. Int. J. Min. Met. Mater., 2013, 20: 284 | [31] | Boonruang C, Thong-on A. Tribological behavior of Ti-5Al-2.5Sn: Ti-10V-2Fe-3Al and Ti-38Al carburized via current heating technique withgraphite powders[J]. Mater. Trans., 2014, 55: 1073 | [32] | Shi K, Xie H S, Zhao J, et al.Influence of vacuum annealing on microstructure and properties of cast Ti-5Al-2.5Sn eli alloy welding sample[J]. Foundry., 2015, 64: 202(史昆, 谢华生, 赵军等. 真空退火对铸造Ti-5Al-2.5SnELI合金焊接试样组织与性能的影响[J]. 铸造, 2015, 64: 202) |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|