|
|
LZ91 Mg-Li合金分流模挤压成形过程数值模拟与实验研究 |
陈良, 赵国群(), 陈高进, 梁赵青, 张存生 |
山东大学液固结构演变与加工教育部重点实验室 济南 250061 |
|
Numerical Simulation and Experimental Study on Porthole Die Extrusion Process of LZ91 Mg-Li Alloy |
Liang CHEN, Guoqun ZHAO(), Gaojin CHEN, Zhaoqing LIANG, Cunsheng ZHANG |
Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061, China |
引用本文:
陈良, 赵国群, 陈高进, 梁赵青, 张存生. LZ91 Mg-Li合金分流模挤压成形过程数值模拟与实验研究[J]. 金属学报, 2018, 54(2): 339-346.
Liang CHEN,
Guoqun ZHAO,
Gaojin CHEN,
Zhaoqing LIANG,
Cunsheng ZHANG.
Numerical Simulation and Experimental Study on Porthole Die Extrusion Process of LZ91 Mg-Li Alloy[J]. Acta Metall Sin, 2018, 54(2): 339-346.
[1] | Li R H, Pan F S, Jiang B, et al.Effect of Li addition on the mechanical behavior and texture of the as-extruded AZ31 magnesium alloy[J]. Mater. Sci. Eng., 2013, A562: 33 | [2] | He J J, Jiang B, Yu X W, et al.Strain path dependence of texture and property evolutions on rolled Mg-Li-Al-Zn alloy possessed of an asymmetric texture[J]. J. Alloys Compd., 2017, 698: 771 | [3] | Yang Y, Peng X D, Ren F J, et al.Constitutive modeling and hot deformation behavior of duplex structured Mg-Li-Al-Sr alloy[J]. J. Mater. Sci. Technol., 2016, 32: 1289 | [4] | Ahn K, Lee H J, Yoon J.Material model for dynamic recrystallization of Mg-8Al-0.5Zn alloy under uni-axial compressive deformation with variation of forming temperatures[J]. Mater. Sci. Eng., 2016, A651: 1010 | [5] | Fatemi-Varzaneh S M, Zarei-Hanzaki A, Beladi H. Dynamic recrystallization in AZ31 magnesium alloy[J]. Mater. Sci. Eng., 2007, A456: 52 | [6] | Zhang Z R, Yang X Y, Xiao Z Y, et al.Dynamic recrystallization behaviors of a Mg-4Y-2Nd-0.2Zn-0.5Zr alloy and the resultant mechanical properties after hot compression[J]. Mater. Des., 2016, 97: 25 | [7] | Kim S H, You B S, Park S H.Effect of billet diameter on hot extrusion behavior of Mg-Al-Zn alloys and its influence on microstructure and mechanical properties[J]. J. Alloys Compd., 2017, 690: 417 | [8] | He X, Zhou J, Li L X, et al.FE analysis and solution of wall thickness attenuation during extrusion to produce a complex hollow magnesium profile[J]. J. Plast. Eng., 2010, 17(2): 62(何芯, 周佳, 李落星等. 镁合金薄壁空心型材挤压壁厚减薄问题的有限元分析及解决方案[J]. 塑性工程学报, 2010, 17(2): 62) | [9] | Zhang B J, Yang H, Guo L G, et al.Numerical simulation of effect rules of porthole axial angle on extrusion process of AZ31 Mg alloy thin-walled tube[J]. Chin. J. Nonferrous Met., 2012, 22: 2713(张保军, 杨合, 郭良刚等. AZ31镁合金薄壁管挤压分流孔轴向倾角影响规律的仿真模拟[J]. 中国有色金属学报, 2012, 22: 2713) | [10] | Liu G, Zhou J, Duszczyk J.FE analysis of metal flow and weld seam formation in a porthole die during the extrusion of a magnesium alloy into a square tube and the effect of ram speed on weld strength[J]. J. Mater. Process. Technol., 2008, 200: 185 | [11] | Hsiang S L, Lin Y W. Investigation of the influence of process parameters on hot extrusion of magnesium alloy tubes [J]. J. Mater. Process. Technol., 2007, 192-193: 292 | [12] | Huang D N, Zhang Z H, Li J Y, et al.Influences of welding chamber depth and welding angle on forming quality of extrusion of square tube by porthole die[J]. Chin. J. Nonferrous Met., 2010, 20: 954(黄东男, 张志豪, 李静媛等. 焊合室深度及焊合角对方形管分流模挤压成形质量的影响[J]. 中国有色金属学报, 2010, 20: 954) | [13] | Donati L, Tomesani L. The effect of die design on the production and seam weld quality of extruded aluminum profiles [J]. J. Mater. Process. Technol., 2005, 164-165: 1025 | [14] | Jo H H, Jeong C S, Lee S K, et al.Determination of welding pressure in the non-steady-state porthole die extrusion of improved Al7003 hollow section tubes[J]. J. Mater. Process. Technol., 2003, 139: 428 | [15] | Jo H H, Lee S K, Jung C S, et al.A non-steady state FE analysis of Al tubes hot extrusion by a porthole die[J]. J. Mater. Process. Technol., 2006, 173: 223 | [16] | Zhang C S, Zhao G Q, Chen H, et al.Optimization of an aluminum profile extrusion process based on Taguchi's method with S/N analysis[J]. Int. J. Adv. Manuf. Technol., 2012, 60: 589 | [17] | Yu J Q, Zhao G Q, Chen L.Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles[J]. J. Mater. Process. Technol., 2016, 230: 153 | [18] | Yu J Q, Zhao G Q, Chen L.Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles[J]. J. Mater. Process. Technol., 2016, 237: 31 | [19] | Chen G J, Chen L, Zhao G Q, et al.Investigation on longitudinal weld seams during porthole die extrusion process of high strength 7075 aluminum alloy[J]. Int. J. Adv. Manuf. Technol., 2017, 91: 1897 | [20] | Yu J Q, Zhao G Q, Zhang C S, et al.Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies[J]. Mater. Sci. Eng., 2017, A682: 679 | [21] | Schikorra M, Donati L, Tomesani L, et al.The role of friction in the extrusion of AA6060 aluminum alloy, process analysis and monitoring[J]. J. Mater. Process. Technol., 2007, 191: 288 | [22] | Jia Y X, Huang J L, Feng J.Hot deformation behavior of Mg-8Li-2Al-1Zn alloy[J]. Trans. Mater. Heat Treat., 2014, 35(9): 210(贾玉鑫, 黄金亮, 冯剑. Mg-8Li-2Al-1Zn合金的热变形行为[J]. 材料热处理学报, 2014, 35(9): 210) | [23] | Akeret R.Properties of pressure welds in extruded aluminium alloy sections[J]. J. Inst. Met., 1972, 10: 202 | [24] | Donati L, Tomesani L. The prediction of seam welds quality in aluminum extrusion [J]. J. Mater. Process. Technol., 2004, 153-154: 366 | [25] | Xu T C, Peng X D, Qin J, et al.Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression[J]. J. Alloys Compd., 2015, 639: 79 | [26] | Gasior W, Moser Z, Zakulski W, et al.Thermodynamic studies and the phase diagram of the Li-Mg system[J]. Metall. Mater. Trans., 1996, 27A: 2419 | [27] | Chang T C, Wang J Y, Chu C L, et al.Mechanical properties and microstructures of various Mg-Li alloys[J]. Mater. Lett., 2006, 60: 3272 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|