Please wait a minute...
金属学报  1992, Vol. 28 Issue (9): 17-24    
  论文 本期目录 | 过刊浏览 |
硼离子注入对多晶Ni力学性能及微观结构的影响
陈立凡;巴图;师昌绪
中国科学院金属研究所材料疲劳与断裂国家重点实验室;博士研究生;北京(100080)中国科学院物理研究所502组;中国科学院金属研究所材料疲劳与断裂国家重点实验室;中国科学院金属研究所材料疲劳与断裂国家重点实验室
EFFECTS OF B~+ IMPLANTATION ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF POLYCRYSTALLINE Ni
CHEN Lifan; BA Tu; Sill Changxu (State key Laboratory for Fatigue and Fracture of Materials; Institute of Metal Research; Academia Sinica; Shenyang)
引用本文:

陈立凡;巴图;师昌绪. 硼离子注入对多晶Ni力学性能及微观结构的影响[J]. 金属学报, 1992, 28(9): 17-24.
, , . EFFECTS OF B~+ IMPLANTATION ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF POLYCRYSTALLINE Ni[J]. Acta Metall Sin, 1992, 28(9): 17-24.

全文: PDF(2585 KB)  
摘要: 用能量为50keV,剂量为3×10~(17)ions/cm_2的B~+注入多晶Ni,通过力学性能实验研究了多晶Ni注入前后表面硬度和疲劳性能的变化,以及多晶Ni表面层注入和疲劳前后化学成分、滑移特征、裂纹萌生、断裂方式和微观结构的变化。结果表明,B~+注入多晶Ni后,表面区域形成一个不同组织结构的由Ni-B非晶、Ni_3B和Ni_4B_3第二相以及辐照损伤组成的多层次的注入层,提高了多晶Ni的表面硬度,并使其疲劳极限提高16%。探讨了B~+注入影响多晶Ni疲劳极限的几种可能机制。
关键词 离子注入疲劳注入层Ni    
Abstract:Polycrystalline Ni was implanted with 50 keV B~+ to a dose of 3×10~(17) ions/cm~2 at room temperature. The specimens with and without B~+ implantation were tested in micro-hardness and load or unload tensile fatigue under stress-controlled condition. The surface layer structure was observed with IMA, SEM and TEM before and after implantation and/or fatigue. The B~+ implanted surface region consists of amorphous Ni-B phase, Ni_3B and Ni_4B_3 second phases, and damage structure. The corresponding measurements indicate that both surface micro-hardness and endurance limit of the specimens have increased after implantation. Compared with unimplanted specimens under the same fatigue condition, all implanted specimens show the smallest overall fatigue damage. The cyclic loading at room temperature can lead to migration of implanted B~+ out of surface layer and recrysatallization of amorphous Ni-B phase. Possible strengthening mechanisms for these experimental results were discussed.
Key wordsion implantation    fatigue    polycrystalline Ni    implanted layer
收稿日期: 1992-09-18     
基金资助:自然科学基金
1 Picraux S T, Pope L E, Science, 1984; 226: 615
2 Hohmuth K, Richter E, Rauschenbach B, Blochwitz C. Mater Sci Ehg, 1985; 69:191
3 Herman H. Nucl Instrum Methods, 1981; 182/183: 887
4 Perry A J. Surf Eng, 1987; 3(2) : 154
5 Vardiman R G, Cox J E. Acta Metall, 1985; 33: 2033
6 Kujre A, Charkabortty S B, Starke E A Jr. Nucl Instrum Methods, 1981; 182/183:949
7 Xu M H, Patu S, Wang Z G. Phys Status Solidi, 1988; 105a; 419
8 McHargue C J. Int Met Rev, 1986; 31(2) : 49
9 Hirvonen J K, Clayton C R. In: Poate J M, Foti G, Jacobson D C eds., Surface Modification and Alloying by Laser, Ion and Electron Beams, New York: Plenum, 1983: 323
10 Grummon D S, Jones J W. Scr Metall, 1986; 20: 311
11 Han J G, Hochman R F. Mater Sci Eng, 1987: 90: 317
12 陈立凡.中国科学院金属研究所硕士学位论文.198
[1] 李嘉荣, 董建民, 韩梅, 刘世忠. 吹砂对DD6单晶高温合金表面完整性和高周疲劳强度的影响[J]. 金属学报, 2023, 59(9): 1201-1208.
[2] 王磊, 刘梦雅, 刘杨, 宋秀, 孟凡强. 镍基高温合金表面冲击强化机制及应用研究进展[J]. 金属学报, 2023, 59(9): 1173-1189.
[3] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229.
[4] 江河, 佴启亮, 徐超, 赵晓, 姚志浩, 董建新. 镍基高温合金疲劳裂纹急速扩展敏感温度及成因[J]. 金属学报, 2023, 59(9): 1190-1200.
[5] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[6] 李小涵, 曹公望, 郭明晓, 彭云超, 马凯军, 王振尧. 低碳钢Q235、管线钢L415和压力容器钢16MnNi在湛江高湿高辐照海洋工业大气环境下的初期腐蚀行为[J]. 金属学报, 2023, 59(7): 884-892.
[7] 张滨, 田达, 宋竹满, 张广平. 深潜器耐压壳用钛合金保载疲劳服役可靠性研究进展[J]. 金属学报, 2023, 59(6): 713-726.
[8] 张哲峰, 李克强, 蔡拓, 李鹏, 张振军, 刘睿, 杨金波, 张鹏. 层错能对面心立方金属形变机制与力学性能的影响[J]. 金属学报, 2023, 59(4): 467-477.
[9] 许林杰, 刘徽, 任玲, 杨柯. CuNi-Ti合金抗支架内再狭窄与耐蚀性能的影响[J]. 金属学报, 2023, 59(4): 577-584.
[10] 李斗, 徐长江, 李旭光, 李双明, 钟宏. La掺杂PCeyFe3CoSb12 热电材料及涂层的热电性能[J]. 金属学报, 2023, 59(2): 237-247.
[11] 张开元, 董文超, 赵栋, 李世键, 陆善平. 固态相变对Fe-Co-Ni超高强度钢长臂梁构件焊接-淬火过程应力和变形的影响[J]. 金属学报, 2023, 59(12): 1633-1643.
[12] 姜江, 郝世杰, 姜大强, 郭方敏, 任洋, 崔立山. NiTi-Nb原位复合材料的准线性超弹性变形[J]. 金属学报, 2023, 59(11): 1419-1427.
[13] 戚钊, 王斌, 张鹏, 刘睿, 张振军, 张哲峰. 应力比对含缺陷选区激光熔化TC4合金稳态疲劳裂纹扩展速率的影响[J]. 金属学报, 2023, 59(10): 1411-1418.
[14] 胡敏, 周生玉, 国京元, 胡明昊, 李冲, 李会军, 王祖敏, 刘永长. 多相Ni3Al基高温合金微区氧化行为[J]. 金属学报, 2023, 59(10): 1346-1354.
[15] 杨超, 卢海洲, 马宏伟, 蔡潍锶. 选区激光熔化NiTi形状记忆合金研究进展[J]. 金属学报, 2023, 59(1): 55-74.