Please wait a minute...
金属学报  1988, Vol. 24 Issue (3): 206-212    
  论文 本期目录 | 过刊浏览 |
硼和碳在一种Ni-Fe-Cr基高温合金中的作用
郭守仁;卢德忠;范鹤鸣
副研究员;沈阳文化路中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所
ROLE OF B AND C IN A Ni-Fe-Cr BASE SUPERALLOY
GUO Shouren;LU Dezhong;FAN Heming Institute of Metal Research; Academia Sinica; Shenyany
引用本文:

郭守仁;卢德忠;范鹤鸣. 硼和碳在一种Ni-Fe-Cr基高温合金中的作用[J]. 金属学报, 1988, 24(3): 206-212.
, , . ROLE OF B AND C IN A Ni-Fe-Cr BASE SUPERALLOY[J]. Acta Metall Sin, 1988, 24(3): 206-212.

全文: PDF(1385 KB)  
摘要: 本文系统地研究了硼和碳对一种Ni-Fe-Cr基高温合金力学性能和组织的影响,发现硼对晶界强化作用比碳大得多,不论固溶硼原子还是硼化物皆可以显著地提高合金的持久强度.添加硼能明显地改善合金的晶界状态和强烈地抑制η等有害相的析出,提高晶界组织稳定性.含0.007%B和<0.04%C时,合金持久性能最佳. 硼和碳对合金的拉伸强度影响不大,但能明显地提高合金的拉伸塑性.为获得良好的拉伸性能,硼和碳含量应分别高于0.002%和0.02%.
关键词 高温合金组织性能    
Abstract:The effects of B and C content on the mechanical properties and mi-crostructures of a Ni-Fe-Cr base superalloy have been investigated. It has beenfound that the role of B in strengthing the grain boundaries is much stronger thanthat of C. Both the B dissolved in matrix and precipitated as boride along thegrain boundaries increase the stress rupture properties of the alloy markedly. Ad-dition of B improves the structure of grain boundaries, suppresses the precipitationof η phase and raises the stability of microstructure of the grain boundaries in thealloy. Addition of either B or C does not effect the tensile strength obviously butincrease the tensile ductility of the alloy. In order to obtain the optimum tensile properties, the minimum contents of Band C should be 0.002 and 0.02% respectively.
Key wordssuperalloy    microstructure    property
收稿日期: 1988-03-18     
1 Sullivan C P, Donachie M J Jr. Met Eng Q, 1971; 11(4) : 1
2 Stroup J P, Pugliese L A. Met Prog. 1968; 93 (2) : 96
3 郭守仁,范鹤鸣,卢德忠·见:师昌绪主编,材料科学进展,科学出版社,1986:29
[1] 毕中南, 秦海龙, 刘沛, 史松宜, 谢锦丽, 张继. 高温合金锻件残余应力量化表征及控制技术研究进展[J]. 金属学报, 2023, 59(9): 1144-1158.
[2] 郑亮, 张强, 李周, 张国庆. /降氧过程对高温合金粉末表面特性和合金性能的影响:粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278.
[3] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[4] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124.
[5] 江河, 佴启亮, 徐超, 赵晓, 姚志浩, 董建新. 镍基高温合金疲劳裂纹急速扩展敏感温度及成因[J]. 金属学报, 2023, 59(9): 1190-1200.
[6] 张雷雷, 陈晶阳, 汤鑫, 肖程波, 张明军, 杨卿. K439B铸造高温合金800℃长期时效组织与性能演变[J]. 金属学报, 2023, 59(9): 1253-1264.
[7] 卢楠楠, 郭以沫, 杨树林, 梁静静, 周亦胄, 孙晓峰, 李金国. 激光增材修复单晶高温合金的热裂纹形成机制[J]. 金属学报, 2023, 59(9): 1243-1252.
[8] 李嘉荣, 董建民, 韩梅, 刘世忠. 吹砂对DD6单晶高温合金表面完整性和高周疲劳强度的影响[J]. 金属学报, 2023, 59(9): 1201-1208.
[9] 马德新, 赵运兴, 徐维台, 王富. 重力对高温合金定向凝固组织的影响[J]. 金属学报, 2023, 59(9): 1279-1290.
[10] 陈佳, 郭敏, 杨敏, 刘林, 张军. 新型钴基高温合金中W元素对蠕变组织和性能的影响[J]. 金属学报, 2023, 59(9): 1209-1220.
[11] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229.
[12] 白佳铭, 刘建涛, 贾建, 张义文. WTa型粉末高温合金的蠕变性能及溶质原子偏聚[J]. 金属学报, 2023, 59(9): 1230-1242.
[13] 王磊, 刘梦雅, 刘杨, 宋秀, 孟凡强. 镍基高温合金表面冲击强化机制及应用研究进展[J]. 金属学报, 2023, 59(9): 1173-1189.
[14] 冯强, 路松, 李文道, 张晓瑞, 李龙飞, 邹敏, 庄晓黎. γ' 相强化钴基高温合金成分设计与蠕变机理研究进展[J]. 金属学报, 2023, 59(9): 1125-1143.
[15] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096.