金属学报  1964, Vol. 7 Issue (4): 437-441

论文 本期目录 | 过刊浏览 |

1.4%C-1.4%Cr鋼等温马氏体形成的金相研究

徐祖耀;朱钰如;王蓉蓉

上海交通大学;上海交通大学;上海交通大学

METALLOGRAPHIC INVESTIGATION OF ISOTHERMAL MARTENSITE FORMATION IN A 1.4％C-1.4％ Cr STEEL

HSU TZU-YAO; TSU CHUEH-JU; WANG YUNG-YUNG(Shanghai Chiao Tung University)

徐祖耀;朱钰如;王蓉蓉. 1.4%C-1.4%Cr鋼等温马氏体形成的金相研究[J]. 金属学报, 1964, 7(4): 437-441.
, , . METALLOGRAPHIC INVESTIGATION OF ISOTHERMAL MARTENSITE FORMATION IN A 1.4％C-1.4％ Cr STEEL[J]. Acta Metall Sin, 1964, 7(4): 437-441.

摘要 参考文献 相关文章 Metrics 全文: PDF(1408 KB)   摘要: 金相观察証明,1.4％C-1.4％Cr钢經1100℃奥氏体化(M_s点为112℃)和淬火后再上淬至100℃进行等温过程中,其等溫轉变产物为馬氏体。当鋼內残余奥氏体量較少(<40％)时,等溫馬氏体的形成以原有馬氏体的继續长大为主。当鋼內残余奥氏体量較大(>50％)时,等温馬氏体的形成以重新形核长大为主。等溫馬氏体也可能在原有馬氏体的某些边上形成,它的数量不大,且和残余奥氏体量无关。文中提出可能的解释。 Abstract：Metallographic investigation shows that the isothermal reaction, near M_s point (100℃) in 1.4% C-1.4% Cr steel quenched from 1100℃, takes place by martensitic transformation. The major portion of the isothermal reaction occurs by the growth of existing martensite when the amount of retained austenite is less than 40%, while occurs by the formation of new plates when it is more than 50%. Isothermal martensite may form at some preferred sites of existing plates in small amount, which is independent of the amount of retained austenite. A probable explanation is suggested. 收稿日期: 1964-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 徐祖耀 朱钰如 王蓉蓉 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1964/V7/I4/437 [1] #12 [2] 张沛霖、徐萃章:金属学报,1956,1,347． [3] Ko, T. (柯俊), Edmondson, B.: Acta Met., 1954, 2, 235． [4] #12 [5] Das Gupta, S. C., Lement, B. S.: Trans. AIME, 1951, 191, 727． [6] Machlin, E. S., Cohen, M.: Trans, AIME, 1952, 194, 489． [7] Kaufman, L., Cohen, M.: Progress in Metal Physics, (Pergamon, 1958) , vol. 7, p. 235-241．! No related articles found! Viewed Full text Abstract Cited   Shared      Discussed