Please wait a minute...
金属学报  1957, Vol. 2 Issue (1): 89-105    
  论文 本期目录 | 过刊浏览 |
含钼复相不锈钢中X-相的形成
庄育智;刘嘉乐;张庆春
中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所;国务院研究生
THE FORMATION OF CHI PHASE IN A Mo-BEARING STAINLESS STEEL
CHUANG YU-CHIH;LIU CHIA-LO;CHANG CHING-CHUNG Institute of Metal Research Academia Sinica
引用本文:

庄育智;刘嘉乐;张庆春. 含钼复相不锈钢中X-相的形成[J]. 金属学报, 1957, 2(1): 89-105.
, , . THE FORMATION OF CHI PHASE IN A Mo-BEARING STAINLESS STEEL[J]. Acta Metall Sin, 1957, 2(1): 89-105.

全文: PDF(10161 KB)  
摘要: 17/5/6 Cr-Ni-Mo不锈钢经1100℃水淬后含40%的δ-铁素体。高温保留下来的铁素体极为不稳定,加热至550°—1000℃在δ—铁素体内发生了一系列的变化。 δ-铁素体分解产物的性质视加热温度而定,在700°—1000℃主要为X-相,在550°—700℃主要为Fe_3No_3C及(Cr,Fe,Mo)_(23)C_6。 X-相形成的形态及其机构亦随加热温度而有所不同。在900°—1000℃δ-铁素体通过共析转变方式分解为X-相及奥氏体γ′δ-共析组织先在γ/δ,δ/δ相界成核然后逐渐向铁素体内部推进。在1000℃粒状的δ-共析组织居多,温度稍低则出现较多的层状组织。在700°—900℃ X-相成核后,奥氏体γ′未能及时成核,因而当X-相的沉淀进行到一定阶段后,δ→γ′的转变才开始。 在600℃保温观察到在奥氏体基体有马氏体的形成,这个现象可能与碳化物在低温的沉淀有关。
Abstract:The decompsition of δ-ferrite in the temperature range 550°—1000℃ inquenched 17/5/6 Cr-Ni-Mo Stainless steel specimens has been studied by meansof microscopic and X-ray diffraction method. It is shown that the nature of thedecomposition product of δ-ferrite varies with the reheating temperature, Chi andaustenite appeared in the temperature range 700—1000℃, Whereas below 700℃Fe_3Mo_3C and (Cr, Fe, Mo)_23C_6 were formed from δ-ferrite instead of Chi. The morphology and mechanism of Chi formation are also dependent on thereheating temperature. Above 900℃, δ-ferrite was found to decompose into Chiand austenite as eutectoid, the leading phase being probably Chi. Between 700℃and 900℃, it is likely that the nucleation of austenite couldnot keep pace withthat of Chi, thus Chi was found to precipitate first and the remaining δ-ferritethen transformed to austenite. Below 700℃ the precipitation of carbides in δ-ferrite was accompanied bymartensite formation in the austenitic matrix. This may be caused by the diffu-sion of carbon from the austenitic matrix to δ-ferrite to supply the carbon re-quired for the carbide precipitation.
收稿日期: 1957-01-18     
[1] Andrews, K. W., Nature, No. 4180 (1949) , 1015.
[2] Andrews, K. W. and Brookes, P. E., Metal Treatment and Drop Forging (1951) , 301.
[3] McMullin, J. G., Reiter, S. F. and Ebeling, D. G., Trans. Amer. Soc. Metals, 46 (1954) , 799.
[4] Kasper, J. S., Acta Metallurgia, 2 (1954) , 456.
[5] Koh, P. K. (郭本坚), Trans. Amer. Inst. Mining & Metallurgical Eng., 197 (1953) , 339.
[6] Ver Snyder, F. L., Beattie, H. J., Trans. Amer. Soc. Metals, 47 (1955) , 211.
[7] Birtalan, J. & Bloom, R. A., Journal of Metals, Feb. (1956) , 210.
[8] Vacher, H. C. & Bechtoldt, C. J., Journal of Research, 53 (1954) , 67.
[9] 庄育智、刘嘉乐,金属学报,1 (1956) ,385.
[10] Gilman, J. J., Trans. Amer. Soc. Metals, 44 (1952) , 566.
[11] Smith, C. S. Trans. Amer. Soc. Metals, 45 (1953) , 533.
[12] Smoluchowski, R., Imperfections in Nearly Periect Crystals (Wiley, 1952) , 451.
[13] Clark, C. L., High Temperature Alloys (Pitman, 1953) , 2.
[14] Krivozok, V. N. & Grossman, M. A., Trans. Amer. Soc. Steel Treating, 18 (1930) , 760.

[15] Avery, H. S., Wilke, C. R & Fellows, J. A., Trans. Amer. Soc. Metals, 44 (1952) , 57.
[16] Gilman J. J., Koh, P. K. (郭本坚) & Zmeskal, O., Trans. Amer Soc. Metals, 41 (1949) , 1371.
[17] Bindari, A. E., Koh, P. K. (郭本坚) & Zmeskal, O., Trans. Amer. Soc. Metals. 43 (1951) , 226.
[18] Morley, J. I., Symposium on High Temperature Steels and Alloys for Gas Turbines (London, 1951) , 195.
[19] Jackson, J. H., Symposium on the Nature, Occurence & Effects of σ-phase (Philadelphia, 1951) , 110.
[20] Nehrenberg, A. E. & Lilly, P., Trans. Amer. Soc. Metals, 46 (1954) , 1176.
[21] Kuo, K. (郭可信), Journal of Iron & Steel Inst., 181 (1955) , 134.
[22] Kuo, K. (郭可信), Journal of Iron and Steel Inst., 176 (1954) , 433.
[23] Kuo, K. (郭可信), Journal of Iron & Stee1 Inst, 181 (1955) , 128.
[24] Braumann, F. & Kraeter, H., Archiv Eisenhuettenw., 25 (1954) , 479.
[25] Mehl, R. F. & Hagel, W. C., Progress in Metal Physics, No. 6 (London, 1956) , 74.
[26] Nicholson, N. E., Journal of Metals, Sept. (1954) , 1071.
[27] Koch, V. W. & Ilschner-Gensch, C., Archiv Eisenhuettenw, 27 (1956) , 453.
[28] Goldschmidt, H. J., Trans. Amer. Soc. Metals, Discussions, 46 (1954) .
[29] Cina, B., Journal Iron & Steel Inst., Disc., 184 (1956) , 58.
[30] Nehrenberg, A. E., Journal Iron & Steel Inst., Disc., 184 (1956) , 60.
No related articles found!